Re: TT S2-3200 + CI Extension

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Werner Hauger wrote:
So what revision of the CI board do you have ?

  
I'm glad you got it working. I wonder if that means there we indeed
have different CI firmware on new CI boards that need to be catered
for in the driver.

  
budget_ci: Slot status d587c000 set to NONE 3 ci_version a0
    
Werner,

The version number printed on the CI board is 1.0A. The firmware version reported by the board is 0xa0 (it is at the end of the above diagnostic.

I think it might be an idea to patch the driver to log the version by default so we can build a picture of which firmware/board/CAM combinations generate interrupts. I am bit suspicious of the fact that my 1.0 rev of the CI board is not generating interrupts in this case, whereas you said in an earlier posting that you had a 1.0 rev of the board that was generating interrupts with a Nova S card (were you using a TT CI board with a Hauppauge card, I am little confused). I should be getting an AstonCrypt CAM in the next few days. I want to test that and see if that does generate interrupts with my 1.0A CI board before I would suggest adding firmware version 0xa0 to the list of the ones that do not generate interrupts.

Roger
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux