> could you show your logs from szap2 > http://liplianindvb.sourceforge.net/cgi-bin/hgwebdir.cgi/szap2/ > > hereafter is my logs with channels.conf and szap2 from Igor > > goga:/usr/src/szap2# ./szap2 -c19 -H -S1 -C910 -M2 -n5 > reading channels from file '19' > zapping to 5 'ASTRA HD+;BetaDigital': > delivery DVB-S2, modulation QPSK > sat 0, frequency 11914 MHz H, symbolrate 27500000, coderate 9/10, rolloff > 0.35 > vpid 0x04ff, apid 0x1fff, sid 0x0000 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 1f | signal 96% | snr 41% | ber 0 | unc 0 | FE_HAS_LOCK > status 1f | signal 96% | snr 42% | ber 0 | unc 0 | FE_HAS_LOCK > status 1f | signal 96% | snr 42% | ber 0 | unc 0 | FE_HAS_LOCK > status 1f | signal 96% | snr 42% | ber 0 | unc 0 | FE_HAS_LOCK > status 1f | signal 96% | snr 42% | ber 0 | unc 0 | FE_HAS_LOCK > > channels.conf for vdr 170 and szap2 from Igor > > ORF 1 > HD;ORF:10832:hC56M2O0S0:S19.2E:22000:1920:1921=deu,1922=eng;1923=deu:1925:D05,1702,1801,648,D95,9C4,1833:61920:1:1057:0 > ANIXE > HD;BetaDigital:11914:hC910M2O35S1:S19.2E:27500:1535:0;1539=deu:0:0:132:133:6:0 > arte > HD;ZDFvision:11361:hC23M5O0S1:S19.2E:22000:6210:6221=deu,6222=fra:6230:0:11120:1:1011:0 > ASTRA > HD+;BetaDigital:11914:hC910M2O35S1:S19.2E:27500:1279:0;1283=deu:0:0:131:133:6:0 > PREMIERE HD,PREM > HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:767:0;771=deu,772=eng:32:1830,1831,1833,1834,9C4,1801:129:133:6:0 > DISCOVERY HD,DISC > HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:1023:0;1027=deu:32:1830,1831,1833,1834,9C4,1801:130:133:6:0 > CINE PREMIER > HD;CSAT:12580:vC23M5O35S1:S19.2E:22000:160:0;82=fra,83=eng:0:100:9301:1:1110:0 > 13EME RUE > HD;CSAT:12580:vC23M5O35S1:S19.2E:22000:161:0;86=fra:0:100:9302:1:1110:0 Goga, as you can see in your own log above, szap2 does not correctly parse the APID and SID from your channels.conf file. This does matter if you want to use the szap2 -p option [add pat and pmt to TS recording (which also implies the -r option)]. get_pmt_pid does not get the correct value. The following channels.conf.fixed works better (format VPID:APID:SID) , but perhaps it would be best to fix the parsing in szap2 instead. ANIXE HD:11914:hC910M2O35S1:S19.2E:27500:1535:1539:132:133:6:0 arte HD:11361:hC23M5O0S1:S19.2E:22000:6210:6221:11120:1:1011:0 ASTRA HD+:11914:hC910M2O35S1:S19.2E:27500:1279:1283:131:133:6:0 $ szap2 -c ~/channels.conf.fixed -H -p -n3 reading channels from file '/home/hans/channels.conf.fixed' zapping to 3 'ASTRA HD+': delivery DVB-S2, modulation QPSK sat 0, frequency 11914 MHz H, symbolrate 27500000, coderate 9/10, rolloff 0.35 vpid 0x04ff, apid 0x0503, sid 0x0083 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ** get_pmt_pid returned : 100 status 1f | signal 77% | snr 50% | ber 0 | unc 0 | FE_HAS_LOCK status 1f | signal 77% | snr 50% | ber 0 | unc 0 | FE_HAS_LOCK ... then watch the channel with: $ mplayer - < /dev/dvb/adapter0/dvr0 Hans -- Release early, release often. Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten Browser-Versionen downloaden: http://www.gmx.net/de/go/browser _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
