> Goga, > as you can see in your own log above, szap2 does not correctly parse the > APID and SID from > your channels.conf file. This does matter if you want to use the szap2 -p > option [add pat and pmt > to TS recording (which also implies the -r option)]. get_pmt_pid does not > get the correct > value. > > The following channels.conf.fixed works better (format VPID:APID:SID) , > but perhaps it would > be best to fix the parsing in szap2 instead. > > ANIXE HD:11914:hC910M2O35S1:S19.2E:27500:1535:1539:132:133:6:0 > arte HD:11361:hC23M5O0S1:S19.2E:22000:6210:6221:11120:1:1011:0 > ASTRA HD+:11914:hC910M2O35S1:S19.2E:27500:1279:1283:131:133:6:0 > > $ szap2 -c ~/channels.conf.fixed -H -p -n3 > > reading channels from file '/home/hans/channels.conf.fixed' > zapping to 3 'ASTRA HD+': > delivery DVB-S2, modulation QPSK > sat 0, frequency 11914 MHz H, symbolrate 27500000, coderate 9/10, rolloff > 0.35 > vpid 0x04ff, apid 0x0503, sid 0x0083 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > ** get_pmt_pid returned : 100 > status 1f | signal 77% | snr 50% | ber 0 | unc 0 | FE_HAS_LOCK > status 1f | signal 77% | snr 50% | ber 0 | unc 0 | FE_HAS_LOCK > ... > > then watch the channel with: > $ mplayer - < /dev/dvb/adapter0/dvr0 > There still seems to be a problem though. All three FTA HD channels lock, but only Arte HD plays properly in mplayer. Mplayer crashes after less than a second for Anixe HD and Astra HD+ : Playing testfile_anixe.ts. TS file format detected. VIDEO H264(pid=1535) AUDIO A52(pid=1539) NO SUBS (yet)! PROGRAM N. 132 FPS seems to be: 25.000000 ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [liba52] AC3 decoding with liba52 Using SSE optimized IMDCT transform Using MMX optimized resampler AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000) Selected audio codec: [a52] afm: liba52 (AC3-liba52) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... [h264 @ 0xbc0b40]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0xbc0b40]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0xbc0b40]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0xbc0b40]number of reference frames exceeds max (probably corrupt input), discarding one Does anyone know what is wrong? Audio only sounds fine. Hans -- Release early, release often. Psssst! Schon das coole Video vom GMX MultiMessenger gesehen? Der Eine für Alle: http://www.gmx.net/de/go/messenger03 _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
