On Mon, Jun 16, 2008 at 17:24:30 +0200, Tino Keitel wrote: > On Mon, May 12, 2008 at 21:05:40 +0200, Patrick Boettcher wrote: > > [...] > > > Trent Piepo was suggesting a solution, but no one ever had time to solve > > this problem. In fast this is only a propblem for developers, not so much > > for the average users as he is not unloading the module usually. > > I unload the module at each suspend and reload it at resume. I did this > with the old driver, because it was not suspend-proof, and I think I > continued to do so because I had suspend/resume problems with the new > driver. > > I'll re-check if the current driver still causes problems with suspend. Today my keyboard was broken after a resume: most key presses got eaten. I unloaded the cinergy driver, removed the USB cable from the CinergyT2 and re-plugged it, which restored the keyboard. This never happened with module unload at suspend and reload at resume. Hereis the dmesg output after resume: dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver) DVB: registering frontend 0 (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)... input: IR-receiver inside an USB DVB receiver as /class/input/input21 dvb-usb: schedule remote query interval to 50 msecs. dvb-usb: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver successfully initialized and connected. usb 1-3: New USB device found, idVendor=0ccd, idProduct=0038 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3: Product: Cinergy T<B2> usb 1-3: Manufacturer: TerraTec GmbH usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 usb 5-1: USB disconnect, address 15 usb 5-1: new full speed USB device using uhci_hcd and address 16 dvb-usb: recv bulk message failed: -75 usb 5-1: configuration #1 chosen from 1 choice usb 5-1: New USB device found, idVendor=05ac, idProduct=8205 usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 dvb-usb: bulk message failed: -110 (9/0) cinergyT2: cinergyt2_fe_set_frontend() Failed! err=-110 dvb-usb: bulk message failed: -110 (1/0) dvb-usb: bulk message failed: -110 (1/0) dvb-usb: bulk message failed: -110 (1/0) dvb-usb: bulk message failed: -110 (1/0) dvb-usb: bulk message failed: -110 (9/0) Regards, Tino Regards, Tino _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
