Ruediger Dohmhardt wrote: > Manu Abraham schrieb: >> Ruediger Dohmhardt wrote: >> >>> Dear Manu, >>> >>> the code from >>> >>> http://jusst.de/hg/mantis (10.5.08) >>> >>> now works fine for the 2033 without the CAM (here Alphacrypt Light) >>> inserted. >>> >>> When I insert the CAM, audio and video stop. I need to remove the CAM >>> and I must reload the module with >>> >>> modprobe -r mantis >>> >>> followed by >>> >>> modprobe mantis >>> >>> Could you please look into the attached /var/log/messages file. >>> Maybe it could provide a hint, what's still wrong. >>> >>> The verbose level is set to 3 (options mantis verbose=3) >>> >> >> >> Applied some changes, couldn't test the changes while being away, but >> only build tests. Please do test again, also feel free to play with the >> individual changesets as to check for various stage tests. >> > Dear Manu, > > all changesets from Saturday night did not recognize the CAM. > I could, though, keep the Alphacrypt-Light plugged, but vdr-1.4.7 > provided only TV from the unencrypted channels. > vdr's CAM menu could not access the CAM. > > changeset 7325b14e79e460fc (Monday evening): > Unencrypted channels: ok: > When I zap to an encrypted one, the drive hangs as shown below. > Then I need to reboot the machine, because > modprobe -r mantis > > could not really unload the module. Can you please test again ? Regards, Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
