> > Load driver with debug=2 (rmmod dvb-usb-af9015; modprobe dvb-usb-af9015 > debug=2) and tail -f /var/log/messages to see if there is now some bytes > coming from remote. As mentioned in an earlier response to this post, the above trashes the device /dev/input/event7. Is there any way I can boot with debug set? > >>> This looks promising.... >>> $ evtest /dev/input/event7 >>> Input driver version is 1.0.0 >>> Input device ID: bus 0x3 vendor 0x13d3 product 0x3226 version 0x200 >>> Input device name: "IR-receiver inside an USB DVB receiver" >> >> Thats the correct one. Doing evtest on /dev/input/event7 then pushing remote buttons give me nothing. I have confirmed remote/receiver works by booting into windows and using vendor supplied app. Cheers Peter -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
