Antti Palosaari wrote: > pjama wrote: >>> Probably there is wrong ir-table loaded to the device by the driver. >>> Ir-table in device and ir-codes from remote should match. Otherwise it >>> will not work. >> How do I confirm this? Should there be something in dmesg? > > I can try to look correct tables from sniffs I have... but it can take > some time. Maybe tomorrow. I did it. Please test http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/ For a little luck some buttons may work. I think all buttons you have makes events and can see in usb-transfers. But there is still mappings to do... Load driver with debug=2 (rmmod dvb-usb-af9015; modprobe dvb-usb-af9015 debug=2) and tail -f /var/log/messages to see if there is now some bytes coming from remote. >> This looks promising.... >> $ evtest /dev/input/event7 >> Input driver version is 1.0.0 >> Input device ID: bus 0x3 vendor 0x13d3 product 0x3226 version 0x200 >> Input device name: "IR-receiver inside an USB DVB receiver" > > Thats the correct one. Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
