Hi, I see there's some activity from Antti in the af9015-mxl500x-copy-fw area for remotes. I got, compiled and installed the latest (although there's a NEW one just 4 minutes old) code 737994f33e83 to see if there's any action for my IR remote bundled with my DigitalNow TinyTwin USB stick. I'm running mythbuntu 8.04 I'm not even sure if I'm on the right track here but entries like the following in dmesg got me excited! input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb2/2-2/input/input7 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: DigitalNow TinyTwin DVB-T Receiver successfully initialized and connected. I'm not having ANY luck extracting any life out of IR though: # sudo irrecord -d /devices/pci0000:00/0000:00:02.1/usb2/2-2/input/input7 test.conf irrecord - application for recording IR-codes for usage with lirc Copyright (C) 1998,1999 Christoph Bartelmus(lirc@xxxxxxxxxxxx) irrecord: could not get file information for /devices/pci0000:00/0000:00:02.1/usb2/2-2/input/input7 irrecord: default_init(): No such file or directory irrecord: could not init hardware (lircd running ? --> close it, check permissions) Same story with /dev/input/event7, I've turned lirc off and irw just refuses to connect. Is there anything I should try or anything I can test? Thanks Peter -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
