On Fri, Mar 21, 2008 at 6:01 PM, Faruk A <fa@xxxxxxxxx> wrote: > > On Wed, Mar 19, 2008 at 7:31 AM, P. van Gaans <w3ird_n3rd@xxxxxxx> wrote: > > > > On 03/19/2008 12:12 AM, Faruk A wrote: > > > TechnoTrend TT-connect S2-3650 CI > > > Vendor ID: 0b48 > > > Product ID: 300a > > > http://www.technotrend.de/2715/TT-connect__S2-3650_CI.html > > > > > > Hi > > > > > > This my first DVB card i bought it two weeks ago and it works great in > > > windows, I knew it was unsupported in Linux but it was cheap and plus > > > CI :) i couldn't resist. > > > > > > I saw Dominik Kuhlen's Pinnacle 452e and André Weidemann's TT-connect > > > S2-3600 patch and i thought why not try it and i did. All i did was > > > change product id from 3007 to 300a, downloaded the the source, > > > patched it and compiled. > > > > > > cd v4l > > > insmod dvb-core.ko > > > insmod dvb-pll.ko > > > insmod stb6100.ko verbose=0 > > > insmod stb0899.ko verbose=0 > > > insmod lnbp22.ko > > > insmod dvb-usb.ko > > > insmod dvb-usb-pctv452e.ko > > > ............................................. > > > dmesg > > > > > > dvb-usb: found a 'Technotrend TT connect S2-3600' in warm state. > > > pctv452e_power_ctrl: 1 > > > dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. > > > DVB: registering new adapter (Technotrend TT connect S2-3600) > > > pctv452e_frontend_attach Enter > > > stb0899_write_regs [0xf1b6]: 02 > > > stb0899_write_regs [0xf1c2]: 00 > > > stb0899_write_regs [0xf1c3]: 00 > > > stb0899_write_regs [0xf141]: 02 > > > _stb0899_read_reg: Reg=[0xf000], data=82 > > > stb0899_get_dev_id: ID reg=[0x82] > > > stb0899_get_dev_id: Device ID=[8], Release=[2] > > > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > > > Offset=[0xf334], Data=[0x444d4431] > > > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > > > Offset=[0xf33c], Data=[0x00000001] > > > stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] > > > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], > > > Offset=[0xfa2c], Data=[0x46454331] > > > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], > > > Offset=[0xfa34], Data=[0x00000001] > > > stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] > > > stb0899_attach: Attaching STB0899 > > > lnbp22_set_voltage: 2 (18V=1 13V=0) > > > lnbp22_set_voltage: 0x60) > > > pctv452e_frontend_attach Leave Ok > > > DVB: registering frontend 0 (STB0899 Multistandard)... > > > pctv452e_tuner_attach Enter > > > stb6100_attach: Attaching STB6100 > > > pctv452e_tuner_attach Leave > > > input: IR-receiver inside an USB DVB receiver as > > > /devices/pci0000:00/0000:00:1d.7/usb5/5-4/input/input8 > > > dvb-usb: schedule remote query interval to 500 msecs. > > > pctv452e_power_ctrl: 0 > > > dvb-usb: Technotrend TT connect S2-3600 successfully initialized and connected. > > > usbcore: registered new interface driver pctv452e > > > ................................................................. > > > > > > ls /dev/dvb/adapter0/ > > > demux0 dvr0 frontend0 net0 > > > ......................................................................... > > > I can scan the channels using patched scan program but vdr format > > > output doesn't work, it just make > > > empty channels.conf file. The zap format works :) > > > > > > I can lock to lnb1 (Thor 1W) lnb2 (Sirius 5E) lnb3 (Hotbird 13E) lnb4 > > > (Astra 19E) using the patched szap but when i wanna lock to channels > > > on different satellite i have to always first lock on lnb1 (Thor). > > > One more thing it doesn't lock with multiproto changeset 7208 and above. > > > > > > No CI support and remote control is like 80% percent working. > > > ................................................................................................................................. > > > I have tried vdr with this card not good at all :( or maybe its just > > > me. As i mentioned before the scan > > > program doesn't produce the vdr format. I had to use vdr settings from > > > this site http://www.linowsat.com. > > > > > > When i start vdr it doesn't lock to any channels or satellite just > > > plain no signal, I have have to first szap -r "any channels on lnb1" > > > kill it and start vdr i can only get pictures from only 2 FTA channels > > > BBC World;Telenor:11325:hC78:S1.0W:24500:513:644=eng:577:0:1001:70:25:0 > > > Gospel Channel Europe;Telenor:11325:hC78:S1.0W:24500:514:648=eng:0:0:129:70:25:0 > > > i can't switch to different satellite just plain no signal maybe wrong > > > diseqc settings? > > > > > > This is what i have in diseqc.conf > > > # Input 1 - Thor - uncommited switch input 1 > > > > > > S1W 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t > > > S1W 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T > > > S1W 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t > > > S1W 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T > > > > > > # Input 2 - Sirius 5.0E - uncommited switch input 1 > > > > > > S5E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t > > > S5E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T > > > S5E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t > > > S5E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T > > > > > > # Input 3 - Hotbird - uncommited switch input 1 > > > > > > S13E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t > > > S13E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T > > > S13E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t > > > S13E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T > > > > > > # Input 4 Astra 1 19.2E - uncommited switch input 1 > > > > > > S19.2E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t > > > S19.2E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T > > > S19.2E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t > > > S19.2E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T > > > ..................................................................................................................... > > > In Windows with Alt-DVB > > > > > > Type: Commited LNB: 1 Raw command: E0 10 38 F0 > > > Type: Commited LNB: 2 Raw command: E0 10 38 F4 > > > Type: Commited LNB: 3 Raw command: E0 10 38 F8 > > > Type: Commited LNB: 4 Raw command: E0 10 38 FC > > > ...................................................................................................................... > > > > > > > > > Anybody wanna works on this this? I'd be willing to help in any way I can. > > > > > > Best regards, > > > Faruk > > > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > linux-dvb mailing list > > > linux-dvb@xxxxxxxxxxx > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > I don't know diseqc.conf (VDR-specific?) or VDR, but the comment says > > "uncommited switch input 1" everywhere and I see two DiSEqC messages > > (most likely one for an uncommitted switch, and the other to switch the > > committed switch behind that). You most likely have no uncommitted > > switches, and if you did you wouldn't need any. You only have one simple > > 4/1 committed switch. Uncommitted only comes in when you need more than > > 4 LNBs and means you will use DiSEqC 1.1. You don't use or need that, > > you only need DiSeqC 1.0. > > > > > Hi! > > I did some testings and here is what i found out. > I can watch channels using vdr from lnb1 (Thor 1W), lnb2 (Sirius 5E), > lnb3 (Hotbird 13E) and lnb4 (Astra 19E). > The catch is i can only watch one frequency. Every time i want to > change to channels on different freq i have to > close vdr and szap -r "channel on new freq" when it locks i close it > and start vdr. > > My kernel.log looks like this when am watching channel on vdr. > > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER | > FE_HAS_LOCK > Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI | > FE_HAS_SYNC > Mar 21 17:56:27 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf50d], data=18 > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER | > FE_HAS_LOCK > Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI | > FE_HAS_SYNC > Mar 21 17:56:27 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf50d], data=18 > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER | > FE_HAS_LOCK > Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI | > FE_HAS_SYNC > Mar 21 17:56:27 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf50d], data=18 > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER | > FE_HAS_LOCK > Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a > Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI | > FE_HAS_SYNC > ................................................................................................................................. > When i change to channels on different freq in vdr: > > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS > Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00 > ............................................................................................................ > > Best regards > Faruk > This is what happen when i load the drivers and start vdr without first zapping with szap. sample: Mar 25 21:14:11 archer stb0899_read_status: Unsupported delivery system Mar 25 21:14:11 archer stb0899_read_status: Unsupported delivery system Mar 25 21:14:11 archer stb0899_read_status: Unsupported delivery system full log @ http://pastebin.com/m3dd8b525 Best regards Faruk _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
