On Thu, Mar 20, 2008 at 1:29 PM, Antti Palosaari <crope@xxxxxx> wrote: > > Jarryd Beck wrote: > > On Tue, Mar 18, 2008 at 1:14 PM, Antti Palosaari <crope@xxxxxx> wrote: > >> Michael Krufky wrote: > >> > >>> Jarryd Beck wrote: > >> >> Takes half a minute to load when plugging in, keyboard is slow to respond > >> >> when tuning, and I get lots of this: > >> >> > >> >> af9013_i2c_gate_ctrl: enable:0 > >> >> af9013_i2c_gate_ctrl: enable:1 > >> >> > >> >> Applied the patch again and it was all fine. > >> >> > >> >> Jarryd. > >> >> > >> > Thanks for the test, Jarryd. I will integrate this into the official > >> > tda18271 driver after testing again on my hardware here. I will > >> > probably make it an attach-time configurable option. > >> > > >> > Regards, > >> > > >> > Mike > >> > >> I did some fixes and I think driver should be now ready. I also changed > >> again device plug / fw-download / usb-relink scheme. I put 500ms sleep > >> to indentify_state in hope that it is enough to drop ghost device driver > >> after fw is downloaded and stick reconnects. > >> > >> However I tested I2C-writing with my MT2060 tuner based device by adding > >> about ~50 register write at once and it did not make any harm. > >> Anyhow, there is now versions to test: > >> > >> version without tuner small-i2c limit: > >> > >> http://linuxtv.org/hg/~anttip/af9015_new/ > >> > >> version with tuner small-i2c limit: > >> http://linuxtv.org/hg/~anttip/af9015_new2/ > >> > >> Regards > >> Antti > >> -- > >> http://palosaari.fi/ > >> > > > > Sorry about the time I took, I had a lot of uni work. > > The second one worked, the first didn't. > > > > Jarryd. > > Thanks, I removed obsolete trees. > Shall I ask two more questions; > Did stick plug work now without no_reconnect or any other modifications > (probably yes)? > How about lock LED? I tried to look sniffs but did not see straight > answer why it did not work for you. Anyhow, I did small change that > could affect it. > If you want to play it you can try to change line from frontend/af9013.c > return af9013_write_reg_bits(state, 0xd730, 0, 1, onoff); > to > return af9013_write_reg_bits(state, 0xd730, 1, 1, onoff); > or 2 or 3 to see if it helps. > > > > regards > Antti > -- > http://palosaari.fi/ > I didn't make any modifications. The lock LED still wouldn't come on. Jarryd. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
