Jarryd Beck wrote: > On Sun, Mar 16, 2008 at 1:04 PM, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote: > >> Jarryd Beck wrote: >> > On Sun, Mar 16, 2008 at 11:47 AM, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote: >> >> Antti Palosaari wrote: >> >> > I have no idea how to debug more. Without device it is rather hard to >> >> > test many things. It will help a little if we know is tuner locked. >> >> > Mike, is it easy to add debug writing for tuner to indicate if tuner >> >> > is locked or not locked? I have used that method earlier with mt2060 >> >> > tuner... >> >> >> >> There is a lock bit in register 0x01[6] but I have not found it to be >> >> reliable, especially not on the c1 part. >> >> >> >> -Mike >> >> >> >> >> >> >> > >> > You won't believe this, but it worked. I think every time I tried both >> > patches together I left .no_reconnect in. I tried it again with both >> > patches applied, no other modifications, and it worked. >> > >> > Thanks for all your help, >> > Jarryd. >> >> This is great news! For an experiment, can you try once more without my patch applied? >> >> This will just confirm whether or not we can write all 39 registers at once. >> >> If the patch that I gave you is truly needed, then I will integrate it into the official driver. >> >> Regards, >> >> Mike >> >> > > Takes half a minute to load when plugging in, keyboard is slow to respond > when tuning, and I get lots of this: > > af9013_i2c_gate_ctrl: enable:0 > af9013_i2c_gate_ctrl: enable:1 > > Applied the patch again and it was all fine. > > Jarryd. > Thanks for the test, Jarryd. I will integrate this into the official tda18271 driver after testing again on my hardware here. I will probably make it an attach-time configurable option. Regards, Mike _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
