Michael Krufky wrote: > Jarryd Beck wrote: >> Takes half a minute to load when plugging in, keyboard is slow to respond >> when tuning, and I get lots of this: >> >> af9013_i2c_gate_ctrl: enable:0 >> af9013_i2c_gate_ctrl: enable:1 >> >> Applied the patch again and it was all fine. >> >> Jarryd. >> > Thanks for the test, Jarryd. I will integrate this into the official > tda18271 driver after testing again on my hardware here. I will > probably make it an attach-time configurable option. > > Regards, > > Mike I did some fixes and I think driver should be now ready. I also changed again device plug / fw-download / usb-relink scheme. I put 500ms sleep to indentify_state in hope that it is enough to drop ghost device driver after fw is downloaded and stick reconnects. However I tested I2C-writing with my MT2060 tuner based device by adding about ~50 register write at once and it did not make any harm. Anyhow, there is now versions to test: version without tuner small-i2c limit: http://linuxtv.org/hg/~anttip/af9015_new/ version with tuner small-i2c limit: http://linuxtv.org/hg/~anttip/af9015_new2/ Regards Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
