On Tue, Mar 18, 2008 at 1:14 PM, Antti Palosaari <crope@xxxxxx> wrote: > Michael Krufky wrote: > > > Jarryd Beck wrote: > >> Takes half a minute to load when plugging in, keyboard is slow to respond > >> when tuning, and I get lots of this: > >> > >> af9013_i2c_gate_ctrl: enable:0 > >> af9013_i2c_gate_ctrl: enable:1 > >> > >> Applied the patch again and it was all fine. > >> > >> Jarryd. > >> > > Thanks for the test, Jarryd. I will integrate this into the official > > tda18271 driver after testing again on my hardware here. I will > > probably make it an attach-time configurable option. > > > > Regards, > > > > Mike > > I did some fixes and I think driver should be now ready. I also changed > again device plug / fw-download / usb-relink scheme. I put 500ms sleep > to indentify_state in hope that it is enough to drop ghost device driver > after fw is downloaded and stick reconnects. > > However I tested I2C-writing with my MT2060 tuner based device by adding > about ~50 register write at once and it did not make any harm. > Anyhow, there is now versions to test: > > version without tuner small-i2c limit: > > http://linuxtv.org/hg/~anttip/af9015_new/ > > version with tuner small-i2c limit: > http://linuxtv.org/hg/~anttip/af9015_new2/ > > Regards > Antti > -- > http://palosaari.fi/ > Sorry about the time I took, I had a lot of uni work. The second one worked, the first didn't. Jarryd. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
