Hi! Here is the complete log. syslog from loading the modules: Feb 12 13:57:34 dev kernel: usb 3-6: new high speed USB device using ehci_hcd and address 3 Feb 12 13:57:34 dev kernel: usb 3-6: configuration #1 chosen from 1 choice Feb 12 13:57:34 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state. Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 1 Feb 12 13:57:34 dev kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Feb 12 13:57:34 dev kernel: DVB: registering new adapter (PCTV HDTV USB) Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Enter Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1b6]: 02 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c2]: 00 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c3]: 00 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf141]: 02 Feb 12 13:57:34 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=81 Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: ID reg=[0x81] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Device ID=[8], Release=[1] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] Feb 12 13:57:34 dev kernel: stb0899_attach: Attaching STB0899 Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 2 (18V=1 13V=0) Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 0x60) Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Leave Ok Feb 12 13:57:34 dev kernel: DVB: registering frontend 0 (STB0899 Multistandard)... Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Enter Feb 12 13:57:34 dev kernel: stb6100_attach: Attaching STB6100 Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Leave Feb 12 13:57:34 dev kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input5 Feb 12 13:57:34 dev kernel: dvb-usb: schedule remote query interval to 100 msecs. Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 0 Feb 12 13:57:34 dev kernel: dvb-usb: PCTV HDTV USB successfully initialized and connected. Feb 12 13:57:34 dev kernel: usbcore: registered new interface driver pctv452e And a complete log from a complete scan on Astra 19,2°E can you download here (about 1,6MB uncompressed, for Download 37kB gzip-File): http://www.rz.uni-karlsruhe.de/~ry52/syslog.gz If you see anything that can help me, please let me know. I don't believe that the new device has also a hardware failiure, because (as I wrote) it works for one time scanning and one time tuning... :-( Hope to get help here, Jens _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
