Dominik Kuhlen schrieb: > Hi > <snip> > >> dev:/usr/src/multiproto# patch -p1 < pctv452e.patch >> patching file linux/drivers/media/Kconfig >> patching file linux/drivers/media/dvb/dvb-usb/Kconfig >> Hunk #1 succeeded at 239 (offset 2 lines). >> patching file linux/drivers/media/dvb/dvb-usb/Makefile >> Hunk #1 succeeded at 61 with fuzz 2. >> patching file linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h >> Hunk #1 FAILED at 139. >> 1 out of 1 hunk FAILED -- saving rejects to file >> linux/drivers/media/dvb/dvb-usb >> /dvb-usb-ids.h.rej >> patching file linux/drivers/media/dvb/dvb-usb/pctv452e.c >> patching file linux/drivers/media/dvb/frontends/Kconfig >> Hunk #1 succeeded at 405 (offset 47 lines). >> patching file linux/drivers/media/dvb/frontends/Makefile >> Hunk #1 succeeded at 42 (offset 3 lines). >> patching file linux/drivers/media/dvb/frontends/lnbp21.c >> Hunk #1 succeeded at 117 (offset -1 lines). >> patching file linux/drivers/media/dvb/frontends/lnbp22.c >> patching file linux/drivers/media/dvb/frontends/lnbp22.h >> patching file linux/drivers/media/dvb/frontends/stb0899_algo.c >> Hunk #1 succeeded at 495 (offset -27 lines). >> patching file linux/drivers/media/dvb/frontends/stb0899_drv.c >> patching file linux/drivers/media/dvb/frontends/stb0899_drv.h >> patching file linux/drivers/media/dvb/frontends/stb6100.c >> patching file linux/include/linux/dvb/frontend.h >> patching file linux/include/linux/dvb/video.h >> Hunk #1 succeeded at 32 with fuzz 1 (offset 1 line). >> dev:/usr/src/multiproto# >> </snip> >> >> So I inserted the line into >> linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h by hand >> #define USB_PID_PCTV_452E 0x021f >> > ok. this might happen if the file has been changed in repository since i have diff'ed. > >> I type make and all compiles with only a few warnings but now without >> any error. >> >> When I install the modules and load them I get the following output from >> dmesg: >> >> </snip> >> usb 3-2: new high speed USB device using ehci_hcd and address 4 >> usb 3-2: configuration #1 chosen from 1 choice >> dvb-usb: found a 'PCTV HDTV USB' in warm state. >> pctv452e_power_ctrl: 1 >> dvb-usb: will pass the complete MPEG2 transport stream to the software >> demuxer. >> DVB: registering new adapter (PCTV HDTV USB) >> pctv452e_frontend_attach Enter >> stb0899_attach: Exiting .. ! >> > Hmm. i wonder why this happens: the stb0899 did not attach properly: > could you please load the stb0899 without verbose= parameter. > it will print more info what's going on. > Hi! Well perhaps it is a hardware error in my device?? Loading the module without "verbose" parameter prints the following in the syslog: Jan 30 19:37:21 dev kernel: usb 3-6: new high speed USB device using ehci_hcd and address 2 Jan 30 19:37:21 dev kernel: usb 3-6: device descriptor read/64, error -71 Jan 30 19:37:22 dev kernel: usb 3-6: device descriptor read/64, error -71 Jan 30 19:37:22 dev kernel: usb 3-6: new high speed USB device using ehci_hcd and address 3 Jan 30 19:37:22 dev kernel: usb 3-6: configuration #1 chosen from 1 choice Jan 30 19:37:22 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state. Jan 30 19:37:22 dev kernel: pctv452e_power_ctrl: 1 Jan 30 19:37:22 dev kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jan 30 19:37:22 dev kernel: DVB: registering new adapter (PCTV HDTV USB) Jan 30 19:37:22 dev kernel: pctv452e_frontend_attach Enter Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1b6]: 02 Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1c2]: 00 Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1c3]: 00 Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf141]: 02 Jan 30 19:37:22 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=05 Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: ID reg=[0x05] Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Device ID=[0], Release=[5] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Demodulator Core ID=[<B7><FF><FE>^E], Version=[-1207960059] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: couldn't find a STB 0899 Jan 30 19:37:22 dev kernel: stb0899_attach: Exiting .. ! Jan 30 19:37:22 dev kernel: dvb-usb: no frontend was attached by 'PCTV HDTV USB' Jan 30 19:37:22 dev kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input4 Jan 30 19:37:22 dev kernel: dvb-usb: schedule remote query interval to 100 msecs. Jan 30 19:37:22 dev kernel: pctv452e_power_ctrl: 0 Jan 30 19:37:22 dev kernel: dvb-usb: PCTV HDTV USB successfully initialized and connected. Jan 30 19:37:22 dev kernel: usbcore: registered new interface driver pctv452e Because of this line I think there is an error in the hardware: Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Demodulator Core ID=[<B7><FF><FE>^E], Version=[-1207960059] Also the light is always showing green (even if it is not connected with a pc). I will test the device under windows this evening to see wheter it is working or not. Jens _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
