my the dmesg reports cx88[0]/2: found at 0000:02:03.2, rev: 5, irq: 22, latency: 32, mmio: 0xdf000000cx8802_probe() allocating 2 frontendscx88/2: cx2388x dvb driver version 0.0.6 loadedcx88/2: registering cx8802 driver, type: dvb access: sharedcx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=59]cx88[0]/2: cx2388x based DVB/ATSC cardtda9887 5-0043: i2c i/o error: rc == -121 (should be 4)dvb: videobuf_dvb_register_adapter()DVB: registering new adapter (cx88[0])dvb: videobuf_dvb_register_adapter() returns 0DVB: registering frontend 0 (Conexant CX24116/CX24118)...DVB: registering frontend 0 (Conexant CX22702 DVB-T)... in dmesg-report I have two frontend0 - is it right ?really I have demux0 demux1 dvr0 dvr1 frontend0 frontend1 net0 net1 Igor -----Original Message-----From: "Craig Whitmore" <lennon@xxxxxxxxxxxx>To: "Steven Toth" <stoth@xxxxxxxxxxx>Date: Wed, 30 Jan 2008 06:58:20 +1300Subject: Re: [PATCH] HVR4000(lite) support for multiproto > > >> > Cool.> >> > This is based on the multi-frontend patches originally from the > > stoth/HVR3000 tree, right?> >> > - Steveьн > >> >> > Yes. based on your work . If you check the cx8802_dvb_advise_acquire it is > in quite a mess at the moment for the CX88_BOARD_HAUPPAUGE_HVR4000 so needs > fixing for the multi frontend. Someone who knows more about how to reset the > chips can fix it up a little. It boots but you get a few errors :-)> > Thanks > _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
