Jens Krehbiel-Gräther schrieb: > Jens Krehbiel-Gräther schrieb: > >> Dominik Kuhlen schrieb: >> >> >>> Hi >>> <snip> >>> >>> >>> >>>> dev:/usr/src/multiproto# patch -p1 < pctv452e.patch >>>> patching file linux/drivers/media/Kconfig >>>> patching file linux/drivers/media/dvb/dvb-usb/Kconfig >>>> Hunk #1 succeeded at 239 (offset 2 lines). >>>> patching file linux/drivers/media/dvb/dvb-usb/Makefile >>>> Hunk #1 succeeded at 61 with fuzz 2. >>>> patching file linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h >>>> Hunk #1 FAILED at 139. >>>> 1 out of 1 hunk FAILED -- saving rejects to file >>>> linux/drivers/media/dvb/dvb-usb >>>> /dvb-usb-ids.h.rej >>>> patching file linux/drivers/media/dvb/dvb-usb/pctv452e.c >>>> patching file linux/drivers/media/dvb/frontends/Kconfig >>>> Hunk #1 succeeded at 405 (offset 47 lines). >>>> patching file linux/drivers/media/dvb/frontends/Makefile >>>> Hunk #1 succeeded at 42 (offset 3 lines). >>>> patching file linux/drivers/media/dvb/frontends/lnbp21.c >>>> Hunk #1 succeeded at 117 (offset -1 lines). >>>> patching file linux/drivers/media/dvb/frontends/lnbp22.c >>>> patching file linux/drivers/media/dvb/frontends/lnbp22.h >>>> patching file linux/drivers/media/dvb/frontends/stb0899_algo.c >>>> Hunk #1 succeeded at 495 (offset -27 lines). >>>> patching file linux/drivers/media/dvb/frontends/stb0899_drv.c >>>> patching file linux/drivers/media/dvb/frontends/stb0899_drv.h >>>> patching file linux/drivers/media/dvb/frontends/stb6100.c >>>> patching file linux/include/linux/dvb/frontend.h >>>> patching file linux/include/linux/dvb/video.h >>>> Hunk #1 succeeded at 32 with fuzz 1 (offset 1 line). >>>> dev:/usr/src/multiproto# >>>> </snip> >>>> >>>> So I inserted the line into >>>> linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h by hand >>>> #define USB_PID_PCTV_452E 0x021f >>>> >>>> >>>> >>> ok. this might happen if the file has been changed in repository since i have diff'ed. >>> >>> >>> >>>> I type make and all compiles with only a few warnings but now without >>>> any error. >>>> >>>> When I install the modules and load them I get the following output from >>>> dmesg: >>>> >>>> </snip> >>>> usb 3-2: new high speed USB device using ehci_hcd and address 4 >>>> usb 3-2: configuration #1 chosen from 1 choice >>>> dvb-usb: found a 'PCTV HDTV USB' in warm state. >>>> pctv452e_power_ctrl: 1 >>>> dvb-usb: will pass the complete MPEG2 transport stream to the software >>>> demuxer. >>>> DVB: registering new adapter (PCTV HDTV USB) >>>> pctv452e_frontend_attach Enter >>>> stb0899_attach: Exiting .. ! >>>> >>>> >>>> >>> Hmm. i wonder why this happens: the stb0899 did not attach properly: >>> could you please load the stb0899 without verbose= parameter. >>> it will print more info what's going on. >>> >>> >>> >> Hi! >> >> Well perhaps it is a hardware error in my device?? >> Loading the module without "verbose" parameter prints the following in >> the syslog: >> >> Jan 30 19:37:21 dev kernel: usb 3-6: new high speed USB device using >> ehci_hcd and address 2 >> Jan 30 19:37:21 dev kernel: usb 3-6: device descriptor read/64, error -71 >> Jan 30 19:37:22 dev kernel: usb 3-6: device descriptor read/64, error -71 >> Jan 30 19:37:22 dev kernel: usb 3-6: new high speed USB device using >> ehci_hcd and address 3 >> Jan 30 19:37:22 dev kernel: usb 3-6: configuration #1 chosen from 1 choice >> Jan 30 19:37:22 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state. >> Jan 30 19:37:22 dev kernel: pctv452e_power_ctrl: 1 >> Jan 30 19:37:22 dev kernel: dvb-usb: will pass the complete MPEG2 >> transport stream to the software demuxer. >> Jan 30 19:37:22 dev kernel: DVB: registering new adapter (PCTV HDTV USB) >> Jan 30 19:37:22 dev kernel: pctv452e_frontend_attach Enter >> Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1b6]: 02 >> Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1c2]: 00 >> Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1c3]: 00 >> Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf141]: 02 >> Jan 30 19:37:22 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=05 >> Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: ID reg=[0x05] >> Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Device ID=[0], Release=[5] >> Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base >> address=[0x00000400], Offset=[0xf334], Data=[0xb7fffe05] >> Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base >> address=[0x00000400], Offset=[0xf33c], Data=[0xb7fffe05] >> Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Demodulator Core >> ID=[<B7><FF><FE>^E], Version=[-1207960059] >> Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base >> address=[0x00000800], Offset=[0xfa2c], Data=[0xb7fffe05] >> Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base >> address=[0x00000800], Offset=[0xfa34], Data=[0xb7fffe05] >> Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: couldn't find a STB 0899 >> Jan 30 19:37:22 dev kernel: stb0899_attach: Exiting .. ! >> Jan 30 19:37:22 dev kernel: dvb-usb: no frontend was attached by 'PCTV >> HDTV USB' >> Jan 30 19:37:22 dev kernel: input: IR-receiver inside an USB DVB >> receiver as /class/input/input4 >> Jan 30 19:37:22 dev kernel: dvb-usb: schedule remote query interval to >> 100 msecs. >> Jan 30 19:37:22 dev kernel: pctv452e_power_ctrl: 0 >> Jan 30 19:37:22 dev kernel: dvb-usb: PCTV HDTV USB successfully >> initialized and connected. >> Jan 30 19:37:22 dev kernel: usbcore: registered new interface driver >> pctv452e >> >> >> >> Because of this line I think there is an error in the hardware: >> Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Demodulator Core >> ID=[<B7><FF><FE>^E], Version=[-1207960059] >> >> Also the light is always showing green (even if it is not connected with >> a pc). >> I will test the device under windows this evening to see wheter it is >> working or not. >> >> > > OK, I really think its a hardware problem. In Windows I get a bluescreen > when I start the TV-Application (on 3 different PCs, so I think it must > be something wrong with the hardware). > I will try again when I get a new device from pinnacle support. > Hi! Finally I got a new device from pinnacle support today. I plugged it into the computer and the modules loaded fine (without an error). But now I have another problem. I scaned for channels and this works fine. After that I tried to tune. First try was "ProSieben HD" (Astra 19,2° E). I got a lock on this channel. After this tuning (it works one time) I could never scan any more or tune to a channel. This is the syslog from scanning for channels: Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: 14 7c Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=5244, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: eb 84 Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=-5244, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: 16 31 Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=5681, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: e9 cf Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=-5681, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf417]: 33 Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: f7 Feb 11 22:12:13 dev kernel: stb0899_read_status: Delivery system DVB-S/DSS Feb 11 22:12:13 dev kernel: stb0899_read_status: Delivery system DVB-S/DSS Feb 11 22:12:14 dev kernel: lnbp22_set_voltage: 2 (18V=1 13V=0) Feb 11 22:12:14 dev kernel: lnbp22_set_voltage: 0x60) Feb 11 22:12:14 dev kernel: _stb0899_read_reg: Reg=[0xf12a], data=5c Feb 11 22:12:14 dev kernel: stb0899_i2c_gate_ctrl: Disabling I2C Repeater ... Feb 11 22:12:14 dev kernel: stb0899_write_regs [0xf12a]: 5c Feb 11 22:12:14 dev kernel: stb0899_sleep: Going to Sleep .. (Really tired .. :-)) Feb 11 22:12:14 dev kernel: stb0899_write_regs [0xf141]: 82 Feb 11 22:12:14 dev kernel: pctv452e_power_ctrl: 0 (these are the last lines, if you need others, please mail me). Is there something that I can do?? It works one time scanning and one time tuning, after that never more (even after some reboots and plugging power off the device). I don't know if I am doing anything wrong, because one time it works... thx, Jens _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
