moi problems reported should be fixed now, please test. http://linuxtv.org/hg/~anttip/af9015/ regards Antti Antti Palosaari wrote: > Diego wrote: >> Yep hangs when got errors in picture but its rare... > > Many DVB-sticks has problems when signal goes weak, maybe it is issue > that can be handled and fixed with driver. I haven't looked this more... > >> About changing channels perhaps its that (low signal) because some channels change fast >> and others no, then display some picture errors but after few seconds the image its >> fine, i experience video freeze too (no audio freeze) sometimes but perhaps its the same >> problem with weak signal. > > Driver uses automatic parameter detection currently, only bandwidth and > frequency are set from userspace application. I will check this later > today and add support for manual & automatic demodulator parameters > settings (TPS). > >> On boot up if i have the dvbt plugged that load driver but not work. >> "klear" says can't open dvb display. > > Frontend does not attach as it should. Can be fixed easily. I will fix > this also. > >> I apply the patch agains agains v4l, perhaps i make something wrong on patch the kernel >> 2.6.22 but seems that not the problem. >> >> Adjunt the two dmesg after patch v4l: >> dvb plugged on boot (not work) >> dvb attached after boot (work) > > I still did not understand why it (system) attach this driver twice. > > regards > Antti -- http://palosaari.fi _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
