On 10/24/07, CityK <CityK@xxxxxxxxxx> wrote: > Steven Toth wrote: > > Chaogui Zhang wrote: > > > >> Hi, everyone, > >> > >> I bought a Pinnacle PCTV HD 800i card recently and I am trying to add > >> support for the card. It has the following chips on board: > >> > >> 1. CX23883 (supported already) > >> 2. Samsung S5H1409 (supported already) > >> 3. Cirrus 5340 ADC (not seen on the I2C bus) > >> 4. ATMEL eeprom (forgot the part no., but probably not needed anyway) > >> 5. Xceive XC5000 or XC3028 tuner. (Not visible, mentioned in the windows > >> driver inf file.) > >> > >> > >> > > > > Great! Take some decent PCB and silicon pictures and make them available > > via a website so we can all see the board. :) > > > > "A" website?? See, the correct answer should be the "LinuxTV wiki" .... > but it doesn't matter, as this has already been done: > http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Card_%28800i%29 > > And speaking of things that have already been done, there already was a > discussion on this card just a FEW DAYS AGO. See: > http://www.linuxtv.org/pipermail/linux-dvb/2007-October/021380.html > > "since Marcus has taken his toys and gone home so to speak" if anything important is missing there let me know. several repositories have been made available before I went for a trip to sweden. Markus > >> The windows inf file refers to Xceive XC5000 as the tuner in the > >> *comment*, but there is NO mentioning of it anywhere else, while > >> XC3028 is referenced a few more times (firmware, tuner type comment > >> etc). I am pasting the relevant parts of the inf file below. > >> > >> .... > >> > >> Based on the windows driver information, is it safe to say that it may > >> contain the XC5000 hardware, > >> > > Yes, it is the XC5000 -- hence the overall ability of the card to > support 256-QAM, as the XC3028 no can provide such .... (XC3028 can > serve up 64-QAM source to the demod, but not 256-QAM). > > It is possible that Pinnacle also developed a similar card based on the > XC3028 -- which would make it, by virtue of component constitution, > similar to some other cards on the market (like KWorld ATSC 120, > Geniatech X8000a, DViCO F5 nano PCI, maybe others..) -- and hence the > presence of the XC3028 stuff in the .inf file, but has only released the > XC5000 based board instead. > > >> I also noticed that on the i2c bus, it seems like the tuner is at > >> 0x64 (there are only 3 visible addresses: 0x19 (s5h1409), 0x50 (eeprom), > >> and 0x64). However, the windows inf file refers to TunerI2CAddress at > >> 0xC2 (which corresponds to 0x61 == (0xC2>>1)). I am puzzled by the > >> discrepancy here > > I'd hazard a guess that the info in the inf only applies to a XC3028 > based board, and not a XC5000 based board. > > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > -- http://www.couchsurfing.com/people/mrec _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
