Oliver Endriss wrote: Hi Oliver, > Please try the current HG driver. (Important because timeouts are now > logged in poll mode, too.) I downloaded the refactoring driver from the bz2-link on this page: http://linuxtv.org/hg/~endriss/v4l-dvb-av7110-refactoring and compiled them. > If it still happens, please replace SAA7146_USE_I2C_IRQ by > SAA7146_I2C_SHORT_DELAY in av7110.c. Does it help? With the new driver I still got the error message :-(. But it looks slightly different than before: "saa7146 (1) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer". I presume the (1) is the second registered frontend. Well this is my budget-ci card and not the FF-Card... So I thought I might as well try your advice for the FF card for the budget card and changed the flag in budget-ci.c to SAA7146_I2C_SHORT_DELAY. Now the error message that shows is: "saa7146_i2c_writeout [poll]: timed out waiting for end of xfer" Until now I thought that the motherboard change had caused this problem, but at the same I have replace the S1400 with an S1500 with a CI connected to it. I now have an Asus M2NPV-VM(NVidia GeForce 6150 + nForce 430) with an Athlon64 3200+ and 512MB DDR2 RAM(667). I am running Debian Etch x86_64 with kernel 2.6.20+refactoring driver. Maybe some of the above might give you a clue on what could be the cause of the problem. Thank you for looking into the problem. Have a nice weekend. André _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
