Sigmund Augdal wrote: > On Tuesday 17 July 2007 07:45, Oliver Endriss wrote: > > Oliver Endriss wrote: > > > Imho the interrupt processing was broken: > > > - The first I2C interrupt should be used to wake-up the task. > > > It does not matter that it takes some time until ERR in IIC_STA > > > will be updated. We don't need it. > > > - Interrupts must be acknowledged at the end of the ISR. > > > > > > @all > > > Please test the attached patch. > > > There shouldn't be any unexpected I2C interrupts anymore. > > > > Attached is an updated patch which does extended status checking. > I've tried this patch on a box running 2.6.20 now for about a day and has not > yet seen any i2c timeouts with it. I have tried to stress the i2c bus a bit > by starting and stopping capture, retuning and browsing the MMI menus of the > CAM quite a lot. I did however not see any pattern in when the i2c timeouts > happened before applying the patch, so I can't possitivly confirm they are > all gone. Ok, patch committed with minor modifications. CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.3.9: http://www.escape-edv.de/endriss/vdr/ ---------------------------------------------------------------- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
