On Sat, 2007-05-12 at 03:23 +0200, Markus Rechberger wrote: > > Regarding the firmware I believe that > > for Australia we should be able to use any xc3028 firmware which will work with > > the board by appending, minus the first byte, my xc3028.au.fw file to the 7MHz > > firmware file and using that as the 7MHz file. (ie we're probably not tied to > > firmware_v3.tgz if there's something better which will work with the Dual > > Digital 4). > > as far as I've seen there's some australia specific firmware > available, so we're not going the wrong way. > The problem is that we have no documentation about specific settings > for your device. Daniel just took the firmware which he captured from > the USB bus, which is the easiest solution to get a step forward. Next > step would be to ask Dvico if they could send us the firmware > hexfiles.. Hello Marcus, This is not correct. I have been using Roger's replacement version of xc3028_DTV7_2633.i2c.fw (original file + xc3028.au.fw - 1 byte). I was experimenting with capturing my own firmware about a week ago but gave that up when I was not making any progress. Daniel _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
