On 5/12/07, ras243-dvb@xxxxxxxxx <ras243-dvb@xxxxxxxxx> wrote:
--- System Administrator <dburr@xxxxxxxxxxxxxx> wrote: > I am still experiencing problems with > SBS (UHF channel 36, 585.625MHz) which, as before, could be caused by > either the set_frequency offset or bad signal quality. Hi Daniel, Can you confirm you need the extra 125kHz offset from the centre frequency (I did for VHF 7 but others don't)? Channel 36 should be on 585.5MHz (actual range is 582-589MHz). Also this is the first channel in UHF band V so it could be antenna related (although I don't know of any UHF antennas which are only band IV). Do you have analogue UHF channels which are picked up okay with the same antenna? Good work on getting it working with the experimental tree.
regarding the specs the different offset is needed for that version of the firmware. I'll implement it within the next 1-2 hours though :-) Markus _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
