On 5/12/07, ras243-dvb@xxxxxxxxx <ras243-dvb@xxxxxxxxx> wrote:
> > Can you confirm you need the extra 125kHz offset from the centre frequency > > regarding the specs the different offset is needed for that version of > the firmware. > I'll implement it within the next 1-2 hours though :-) > > Markus > Hi Markus, Is the extra 125kHz offset band specific or regional specific for certain frequencies (it seems almost random)?
no this is firmware specific, firmware version 2.5 should always have the same offset, most devices should use firmware 2.4 or firmware 2.7 though
Regarding the firmware I believe that for Australia we should be able to use any xc3028 firmware which will work with the board by appending, minus the first byte, my xc3028.au.fw file to the 7MHz firmware file and using that as the 7MHz file. (ie we're probably not tied to firmware_v3.tgz if there's something better which will work with the Dual Digital 4).
as far as I've seen there's some australia specific firmware available, so we're not going the wrong way. The problem is that we have no documentation about specific settings for your device. Daniel just took the firmware which he captured from the USB bus, which is the easiest solution to get a step forward. Next step would be to ask Dvico if they could send us the firmware hexfiles.. The firmwares are bound to the devices since they also contain device specific settings. Markus _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb