Tomi Orava wrote: >> >> Maybe the parallel data output configuration is wrong and the data is >> latched at the wrong edge. The value is in the inittab, adress 0x12. The >> clock polarity is bit 0, so a change to 0xa1 would be worth a try. >> > > I changed the inittab line: > > 0x12,0xff,0xa0, // INTP1 POCLKP=1 FEL=1 MFS=0 > to > 0x12,0xff,0xa1, // INTP1 POCLKP=1 FEL=1 MFS=0 > > but without success. > This configuration is overwritten in budget-av.c. Changing this value in the init-tab makes no sense. > > PS. Attached is the merged driver diff I've tried to get working. > Thanks for using the patch from http://www.vdr-portal.de/board/attachment.php?attachmentid=13610. > > + state->reg0 = tda10023_inittab[0]; // 0x73; // FIXME!!! > I've change this value to the old one from the tda10021 driver. Using of tda10023_inttab[0] in this way is wrong, because the format of the inittab has changed. - Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
