On Sunday 19 November 2006 20:51, Gregoire Favre wrote: > On Sun, Nov 19, 2006 at 08:17:01PM +0000, Andrew de Quincey wrote: > > Gah, you're right, I misread the dmesg; they're the same. What if you > > swap the two FF cards round? Does the first card then start failing > > DISEQC? > > No, if I only keep the failling card, on every of my five PCI slots it > fails, and the others cards always works. > > I have even done the " loesung 3: externer 5volt spannungsregler > (izeman)" from http://vdr-wiki.de/wiki/index.php/SpannungsMod on the > failling card, and it don't seems to change anything at all. > > I don't know if the card has not enough power to send the diseqc command > or ??? Ah ok, so its definitely that card... hmm.. does it looks physically the same as the working FF card? Has it ever worked ok? I dont use FF cards myself, but I /have/ seen budget cards which suddenly stop working... nothing weird is seen in dmesg: tuning works fine. The card simply starts getting a really bad signal. If you move the card about/change cables (even a completely different machine), it makes no difference. I'm not saying thats necessarily the case here, but just mentioning it. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
