On Sunday 19 November 2006 19:20, Gregoire Favre wrote: > On Sun, Nov 19, 2006 at 06:46:07PM +0000, Andrew de Quincey wrote: > > OK, well the two FF cards have different frontends on them, which is a > > lead... next, can you tell me which adapter has the DISEQC problem? > > Well, with -D0 VDR works pretty well :) > But with -D1 only first sat seems to work, so it's the second card. > > If I unload/reload the driver : > saa7146: register extension 'dvb'. > ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17 > saa7146: found saa7146 @ mem ffffc2000007ce00 (revision 1, irq 17) > (0x13c2,0x0000). DVB: registering new adapter (Technotrend/Hauppauge WinTV > DVB-S rev1.X or Fujitsu Siemens DVB-C). adapter has MAC addr = > 00:d0:5c:00:41:90 > dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app > 80f22623 dvb-ttpci: firmware @ card 0 supports CI link layer interface > dvb-ttpci: adac type set to 0 @ card 0 > saa7146_vv: saa7146 (0): registered device video0 [v4l2] > saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] > ves1x93: Detected ves1893a rev2 > DVB: registering frontend 0 (VLSI VES1x93 DVB-S)... > input: DVB on-card IR receiver as /class/input/input11 > dvb-ttpci: found av7110-0. > ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 > saa7146: found saa7146 @ mem ffffc200002aaa00 (revision 1, irq 19) > (0x13c2,0x0000). DVB: registering new adapter (Technotrend/Hauppauge WinTV > DVB-S rev1.X or Fujitsu Siemens DVB-C). adapter has MAC addr = > 00:d0:5c:1f:50:c8 > dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app > 80f22623 dvb-ttpci: firmware @ card 1 supports CI link layer interface > dvb-ttpci: adac type set to 0 @ card 1 > saa7146_vv: saa7146 (1): registered device video1 [v4l2] > saa7146_vv: saa7146 (1): registered device vbi1 [v4l2] > ves1x93: Detected ves1893a rev2 > DVB: registering frontend 1 (VLSI VES1x93 DVB-S)... > dvb-ttpci: found av7110-1. > saa7146: register extension 'budget_ci dvb'. > ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18 > saa7146: found saa7146 @ mem ffffc20000440c00 (revision 1, irq 18) > (0x13c2,0x100f). saa7146 (2): dma buffer size 192512 > DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI). > adapter has MAC addr = 00:d0:5c:23:a3:9b > input: Budget-CI dvb ir receiver saa7146 (2) as /class/input/input12 > DVB: registering frontend 2 (ST STV0299 DVB-S)... > > I don't see where it prints the frontend are different ? Gah, you're right, I misread the dmesg; they're the same. What if you swap the two FF cards round? Does the first card then start failing DISEQC? _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
