Re: FusionHDTV DVB-T Dual Digital2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I've tried a few things over the last few days:

- I grabbed a channels.conf from one of my collegues who lives quite close to 
where I do, and configured mplayer to use it. No dice.

- Borrowed a similar tuner (DViCO FusionHDTV DVB-T USB usbid 0fe9:db11) and 
got that working no problems. Generated a conf from it, watched a couple of 
channels, etc so its definatly not a signal issue.

- Put the Dual Digital 2 back in and tried it with the newly generated conf; 
the card locked up again.

I'm starting to think it might be something to do with when its locking onto a 
signal. I'm probably going to put some kprobes into the kernel and see whats 
going on right before the lockup.

If you think it would be of some benefit, I can come onto IRC sometime and we 
can try and work out whats going on. What timezone are you in?

Mark

On Friday 29 September 2006 22:27, Michael Krufky wrote:
> Mark wrote:
> > Incidentally, I checked the inf file from the windows driver that came on
> > the CD - it definatly has the USB id in it for the card. Is there any way
> > I can extract the firmware? Maybe they've updated it for this particular
> > card.
>
> Nope -- the firmware is the same, I checked.
>
> Scan seems to be working properly (except for the lockup) ... Can you
> try to get a video stream using your favorite tool?  ie: tzap + mplayer,
> mplayer alone, kaffeine, xine, whatever?
>
> ---
>
> Try unloading the dvb-usb-cxusb and dvb-usb modules, then turn on debug
> in the dvb-usb module... (see modinfo dvb-usb -- the debug settings are
> or-able) and load up the dvb -usb-cxusb module again... Try to reproduce
> the lockup above -- we should see better info in dmesg this time.
>
> Next time it locks up..... does yanking out the usb plug unlock it?
> (Expect an oops if you yank it while it's in use)
>
> ---
>
> I think this locking up problem is not directly related to the new
> hardware or driver -- DViCO says it is exactly identical to the hardware
> used in the prior version.
>
> Thanks for testing, hopefully we can solve your lockup problem as well.
>
> Cheers,
>
> Mike

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux