Incidentally, I checked the inf file from the windows driver that came on the CD - it definatly has the USB id in it for the card. Is there any way I can extract the firmware? Maybe they've updated it for this particular card. Mark On Friday 29 September 2006 08:24, Mark McKenzie wrote: > I tried the new version of the driver last night with some success > > The driver loads with the following messages in dmesg: > > Sep 29 08:13:04 kulfi kernel: [ 16.216298] dvb-usb: found a 'DViCO > FusionHDTV DVB-T Dual Digital 2' in cold state, will try to load a firmware > Sep 29 08:13:04 kulfi kernel: [ 16.305374] dvb-usb: downloading firmware > from file 'dvb-usb-bluebird-01.fw' > Sep 29 08:13:04 kulfi kernel: [ 16.367611] dvb-usb: found a 'DViCO > FusionHDTV DVB-T Dual Digital 2' in cold state, will try to load a firmware > Sep 29 08:13:04 kulfi kernel: [ 16.369592] dvb-usb: downloading firmware > from file 'dvb-usb-bluebird-01.fw' > Sep 29 08:13:04 kulfi kernel: [ 16.431272] usbcore: registered new driver > dvb_usb_cxusb > Sep 29 08:13:04 kulfi kernel: [ 16.564442] usb 7-1: USB disconnect, > address 2 > Sep 29 08:13:04 kulfi kernel: [ 16.564545] dvb-usb: generic DVB-USB > module successfully deinitialized and disconnected. > Sep 29 08:13:04 kulfi kernel: [ 16.669246] usb 7-2: USB disconnect, > address 3 > Sep 29 08:13:04 kulfi kernel: [ 16.669343] dvb-usb: generic DVB-USB > module successfully deinitialized and disconnected. > Sep 29 08:13:04 kulfi kernel: [ 18.267412] usb 7-1: new high speed USB > device using ehci_hcd and address 4 > Sep 29 08:13:04 kulfi kernel: [ 18.384471] usb 7-1: configuration #1 > chosen from 1 choice > Sep 29 08:13:04 kulfi kernel: [ 18.384779] dvb-usb: found a 'DViCO > FusionHDTV DVB-T Dual Digital 2' in warm state. > Sep 29 08:13:04 kulfi kernel: [ 18.384900] dvb-usb: will pass the > complete MPEG2 transport stream to the software demuxer. > Sep 29 08:13:04 kulfi kernel: [ 18.395525] DVB: registering new adapter > (DViCO FusionHDTV DVB-T Dual Digital 2). > Sep 29 08:13:04 kulfi kernel: [ 18.731996] DVB: registering frontend 0 > (Zarlink ZL10353 DVB-T)... > Sep 29 08:13:04 kulfi kernel: [ 18.732535] input: IR-receiver inside an > USB DVB receiver as /class/input/input3 > Sep 29 08:13:04 kulfi kernel: [ 18.732624] dvb-usb: schedule remote query > interval to 150 msecs. > Sep 29 08:13:04 kulfi kernel: [ 18.732680] dvb-usb: DViCO FusionHDTV > DVB-T Dual Digital 2 successfully initialized and connected. > > Then I ran scan with the example file for my city: > > root@kulfi:/var/log# scan > /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-canberra > scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-canberra > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 205625000 1 3 3 3 1 1 0 > initial transponder 177500000 1 2 0 3 1 2 0 > initial transponder 191625000 1 3 0 3 1 1 0 > initial transponder 219500000 1 3 1 3 1 1 0 > initial transponder 543500000 1 2 0 3 1 2 0 > > >>> tune to: > > 205625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSIO >N_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! > > >>> tune to: > > 205625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSIO >N_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > > >>> tune to: > > 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSI >ON_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 0x0807 0x0807: pmt_pid 0x0160 > Southern Cross Television -- SC10 Canberra (running) > 0x0807 0x0827: pmt_pid 0x06ae Southern Cross Television -- SC10 HD > (running) Network Name 'Southern Cross Television ' > > >>> tune to: > > 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSI >ON_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!! > > >>> tune to: > > 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSI >ON_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > > >>> tune to: > > 219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSIO >N_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE Network Name 'WIN Digital' > 0x327a 0x0001: pmt_pid 0x0020 WIN Digital -- WIN TV Canberra (running) > 0x327a 0x000a: pmt_pid 0x00b0 WIN Digital -- WIN TV HD (running) > > >>> tune to: > > 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSI >ON_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 0x0350 0x0350: pmt_pid 0x0400 > SBS -- SBS HD (running) > 0x0350 0x0351: pmt_pid 0x0401 SBS -- SBS DIGITAL 1 (running) > 0x0350 0x0352: pmt_pid 0x0402 SBS -- SBS DIGITAL 2 (running) > 0x0350 0x0353: pmt_pid 0x0408 SBS -- SBS EPG (running) > 0x0350 0x035e: pmt_pid 0x0403 SBS -- SBS RADIO 1 (running) > 0x0350 0x035f: pmt_pid 0x0404 SBS -- SBS RADIO 2 (running) > Network Name 'SBS NETWORK' > > >>> tune to: > > 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSIO >N_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! > > >>> tune to: > > 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSIO >N_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) > > and at that point the machine had locked up hard. > > I also noticed that on some occasions it would lock up on the first channel > it found as well. > > Mark > > Michael Krufky <mkrufky@xxxxxxxxxxx> wrote: > >Michael Krufky wrote: > >> Michael Krufky wrote: > >>> I have written to my contact at DViCO with some questions about this > >>> device. While we're waiting for his response, please try the > > > >suggestion > > > >>> above. Please keep in mind that you will need to have the bluebird > >>> firmware present in order for this test to work. > >> > >> I've received confirmation from DViCO that the usb components on the > >> DViCO FusionHDTV DVB-T Dual Digital 2 are identical to the usb component > >> on the DViCO FusionHDTV DVB-T Dual Digital 1. > >> > >> The attached patch, applied against v4l-dvb master repository, adds > >> support for your device. Please test this and let me know how it goes. > >> > >> ...or you can just clone the tree located at: > >> > >> http://linuxtv.org/hg/~mkrufky/cxusb > > > >Oops.... Slight problem in that last patch... I fixed it in the tree, > >and the corrected patch is attached. Let me know how it works. > > > > cxusb.c | 16 +++++++++++----- > > dvb-usb-ids.h | 10 ++++++---- > > 2 files changed, 17 insertions(+), 9 deletions(-) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
