Michael Krufky wrote: > James Fidell wrote: >> Unfortunately running "modprobe saa7134-dvb" appears to achieve >> absolutely nothing at all. The module loads, but gives no dmesg output >> and no /dev/dvb devices are created. Any ideas? > > This would usually happen if the driver doesnt think your card has DVB > functionality, although that sounds unlikely in your case. Maybe you'd > have better results with the sources in linuxtv.org mercurial, unless > Hartmut has any better idea... > > BTW, linuxtv.org's mercurial drivers will NOT build correctly against > the FC5 kernel, due to the fact that FC5 is currently using a 2.6.18 > kernel which identifies itself as 2.6.17. OTOH, if you're using the > atrpms package repository, you can upgrade your v4l-dvb modules by doing: > > yum install video4linux-kmdl-`uname -r` Ok, I've done that, but still look to be in the same position. > umm... what makes you think the drivers can see the hardware? You are > using cx88-blackbird devices -- these do not have DVB functionality. > You should see cx88-dvb announce the fact that it has loaded itself, but > it will not do anything with those cards. Grrr. I was told by the person who gave them to me that they were digital cards. I'll forget about them and concentrate on the DVB-T200 then. James _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
