Hi
hermann pitton wrote:
Hi,
Am Donnerstag, den 07.09.2006, 22:35 +0100 schrieb James Fidell:
Michael Krufky wrote:
According to the website, all
the DVB-T2* cards have TV input, though the T220 doesn't have a
composite input.
for that one, all the chips have support for composite, svideo and,
sometimes not connected, composite over svideo input.
The manufacturer must be somewhat crazy not to use it ...
I know for sure from the past Compro is not.
Cheers,
Hermann
Since i worked on the T200 and T200a:
These cards support DVBT-T and analog baseband, but no analog TV
via tuner. That's why the config entry in saa7134-cards.c says
TUNER_ABSENT - as Michael already mentioned.
The T200 is known to work, but since i never had this card in hand,
i am not sure whether the definition of the baseband inputs is correct.
As mentioned before, you need to load the saa7134-dvb module, afterwards
the devices will be available. To make the card work, you need a
firmware file, use the script get_dvb_firmware.pl in the Documentation/dvb
directory. You will need the file for the tda10046.
For the T200a, you currently need a hack to get it working. you will find
instructions in the v4l-dvb wiki.
I never heard of the T220, so i can't tell about getting it working before
i got more information.
Best regards
Hartmut
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
