Jonas Jonsson wrote:
Hi, Jonas
Jonas Jonsson wrote:
Hi..
I have two Compro DVB-T200A that I can't get to work using Linux. I
have verified that the cards works and I can scan using Windows XP.
First I load the modules (saa7134 i2c_scan=1, saa7134-dvb,
saa7134-alsa) and then I use dvbscan with the correct file for my
location. Verified the
freqs from the brodcasters pages, it's correct and I have manged to
tune to that freq using Windows.
Here is modprobe, lsmod and dvbscan (The problem)
http://pastebin.ca/121062
Here is the resulting dmesg
http://pastebin.ca/121083
I'm running Gentoo with a 2.6.17.7 kernel with some extra patches for
Suspend2, I have compiled the v4l-dvb drivers from HG, compiled like an
hour ago.
Any suggestions, I'm kind of stuck right now.
/Jonas
Some months ago, i have been in contact with another owner of the 200A. The
problem is that the card identifies itself as a 200, but has very different
hardware. It is a 300, but with the components for analog missing.
Please try the following:
In saa7134-dvb.c, from line 353 on, please delete the lines
/* switch the board to dvb mode */
init_msg.addr = 0x43;
init_msg.len = 0x02;
msg[0] = 0x00;
msg[1] = 0x40;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
return -EIO;
Recompile and unload at least the modules saa7134-dvb and saa7134. Then
reload the driver forcing the card type to 70 (the 300)
modprobe saa7134 card=70
modprobe saa7134-dvb
Now it should work. If it does, please don't forget to report this.
Afterwards, we need to find a solution we can integrate into mainline.
Best regards
Hartmut
Hi..
Sorry for my last mail, stupid keyboard...
It works... Thanks, now I can scan...
When doing
modprobe saa7134 card=70
I get this in dmesg
saa7130[1]: subsystem: 185b:c901, board: Compro Videomate DVB-T200
[card=71,autodetected]
Can you please recheck?
Thanks to christoph4 at #linux-tv how saw that there is a diff in the eeprom
at http://www.linuxtv.org/pipermail/linux-dvb/2005-October/005423.html
there is a dmesg from DVB-T200 card
DVB-T200: saa7130[0]: i2c eeprom 60: 30 26 ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
DVB-T200A: saa7130[1]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
This could be the thing to diff the cards from each other.
I would perfer a complete dump of the eeprom (dmesg).
best regards
Hartmut
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
