> Hi, Jonas > > Jonas Jonsson wrote: >> Hi.. >> >> I have two Compro DVB-T200A that I can't get to work using Linux. I have verified that the cards works and I can scan using Windows XP. >> >> First I load the modules (saa7134 i2c_scan=1, saa7134-dvb, saa7134-alsa) and then I use dvbscan with the correct file for my location. Verified the >> freqs from the brodcasters pages, it's correct and I have manged to tune to that freq using Windows. >> >> Here is modprobe, lsmod and dvbscan (The problem) >> http://pastebin.ca/121062 >> >> Here is the resulting dmesg >> http://pastebin.ca/121083 >> >> I'm running Gentoo with a 2.6.17.7 kernel with some extra patches for Suspend2, I have compiled the v4l-dvb drivers from HG, compiled like an hour ago. >> >> Any suggestions, I'm kind of stuck right now. >> >> /Jonas >> > Some months ago, i have been in contact with another owner of the 200A. The > problem is that the card identifies itself as a 200, but has very different > hardware. It is a 300, but with the components for analog missing. Please try the following: > In saa7134-dvb.c, from line 353 on, please delete the lines > > /* switch the board to dvb mode */ > init_msg.addr = 0x43; > init_msg.len = 0x02; > msg[0] = 0x00; > msg[1] = 0x40; > if (fe->ops.i2c_gate_ctrl) > fe->ops.i2c_gate_ctrl(fe, 1); > if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) > return -EIO; > > Recompile and unload at least the modules saa7134-dvb and saa7134. Then reload the driver forcing the card type to 70 (the 300) > > modprobe saa7134 card=70 > modprobe saa7134-dvb > > Now it should work. If it does, please don't forget to report this. Afterwards, we need to find a solution we can integrate into mainline. > > Best regards > Hartmut > > Hi.. Sorry for my last mail, stupid keyboard... It works... Thanks, now I can scan... When doing modprobe saa7134 card=70 I get this in dmesg saa7130[1]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected] Thanks to christoph4 at #linux-tv how saw that there is a diff in the eeprom at http://www.linuxtv.org/pipermail/linux-dvb/2005-October/005423.html there is a dmesg from DVB-T200 card DVB-T200: saa7130[0]: i2c eeprom 60: 30 26 ff ff ff ff ff ff ff ff ff ff ff ff ff ff DVB-T200A: saa7130[1]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff This could be the thing to diff the cards from each other. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
