Hartmut Hackmann wrote:
<snip>
That's a bit strange. Please set the debug option for the tuner module
and
watch the kernel log.
I need to study the MT352 datasheet again. Maybe the tuner needs to be
programmed through it as it is with the tda10046.
I had a look. Things are different but it seems to be possible to program
the tuner through the MT352. But i don't think this is right.
What is the exact tuner type? is it a TD1316A?
Please have a close look at the card, ist there an analog switch IC,
like the 4052 / 4066. Normally it is in a 14 or 16 pin so dip package.
My card is exactly those described in this post (with images):
http://www.pvrweb.com/bbs-old/viewtopic.php?t=41737
I set debug option this way:
modprobe ir_kbd_i2c debug=1
modprobe video_buf debug=1
modprobe video_buf_dvb debug=1
modprobe tuner debug=1
modprobe mt352 debug=1
modprobe saa7134-dvb
dmesg output:
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 5 (level, low)
-> IRQ 5
saa7133[0]: found at 0000:00:0b.0, rev: 209, irq: 5, latency: 32, mmio:
0xe3001000
saa7133[0]: subsystem: 1461:2c00, board: AverTV Hybrid+FM PCI
[card=97,autodetected]
saa7133[0]: board init: gpio is 2f404
input: saa7134 IR (AverTV Hybrid+FM PC as /class/input/input4
ir-kbd-i2c: probe 0x7a @ saa7133[0]: no
ir-kbd-i2c: probe 0x47 @ saa7133[0]: no
tuner 1-0043: chip found @ 0x86 (saa7133[0])
tuner 1-0043: Calling set_type_addr for type=62, addr=0xff, mode=0x02
tuner 1-0043: set addr for type 74
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0043: saa7133[0] tuner I2C addr 0x86 with type 74 used for 0x0e
tuner 1-0060: TEA5767 detected.
tuner 1-0060: chip found @ 0xc0 (saa7133[0])
tuner 1-0060: set addr for type 62
tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 1-0060: saa7133[0] tuner I2C addr 0xc0 with type 62 used for 0x02
saa7133[0]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-0043: Calling set_type_addr for type=67, addr=0x00, mode=0x0e
tuner 1-0043: set addr for type 74
tuner 1-0060: Calling set_type_addr for type=67, addr=0x00, mode=0x0e
tuner 1-0060: set addr for type 62
tuner 1-0043: Cmd VIDIOC_S_STD accepted for analog TV
tuner 1-0043: switching to v4l2
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7133[0]: avertv hybrid+fm pci dvb setup
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
lsmod|grep saa output:
saa7134_dvb 13444 0
dvb_pll 11908 1 saa7134_dvb
saa7134 106848 1 saa7134_dvb
compat_ioctl32 1024 1 saa7134
videodev 21376 1 saa7134
v4l1_compat 12548 2 saa7134,videodev
nxt200x 12676 1 saa7134_dvb
tda1004x 14084 1 saa7134_dvb
mt352 6148 1 saa7134_dvb
v4l2_common 18432 3 saa7134,videodev,tuner
ir_kbd_i2c 6544 1 saa7134
ir_common 24196 2 saa7134,ir_kbd_i2c
video_buf_dvb 4228 1 saa7134_dvb
video_buf 19460 3 saa7134_dvb,saa7134,video_buf_dvb
firmware_class 7552 3 saa7134_dvb,nxt200x,tda1004x
i2c_core 16784 9
saa7134_dvb,dvb_pll,saa7134,nxt200x,tda1004x,mt352,tuner,ir_kbd_i2c
,i2c_viapro
I hope this help
Pierpaolo
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
