On Tue, 1 Aug 2006, Chris Malarky wrote: > On an up-to-date Debian Etch box I went through the hg pull/make/make > install/reboot process (documented in the Wiki), but when I try to load > the budget module I get: > > budget: disagrees about version of symbol saa7146_unregister_extension > budget: Unknown symbol saa7146_unregister_extension > budget: disagrees about version of symbol s5h1420_attach > budget: Unknown symbol s5h1420_attach This almost always means you have an old module loaded. In the first case the budget.ko module is complaining about a symbol from the saa7146.ko module. One of them is probably a leftover module from a previous compile. If you want to compile the v4l-dvb source for a new kernel, you must do a make distclean in the v4l-dvb directory. Just make or even make clean will not reset it, and it will continue to use your old kernel. To see if you are loading the right modules, try these commands: find /lib/modules/`uname -r`/kernel -name budget.ko* -ls find /lib/modules/`uname -r`/kernel -name saa7146.ko* -ls Look at the dates in the files. They should be within a minute of each other. Then check your v4l-dvb source tree, in the v4l directory, for those two .ko files. Make sure they were both created at the same time. > I am on the right track doing a 'make release > DIR=~/path/to/kernel/source/' and 'make kernel-links' from within my > v4l-dvb directory? I'm assuming I can then do my 'make menuconfig' as > normal from within the kernel source tree? You can do a make menuconfig from the v4l-dvb directory without putting it inside the kernel. It will let you configure just the v4l-dvb stuff using the kernel menuconfig (or xconfig, etc.) programs. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
