Manu Abraham wrote:
Zoilo Gomez wrote:
I am really stuck now.
=> Twinhan in WindozeXP: seems to lock OK to correct freqs/ts (6900,
QAM64), but no PIDs are being extracted on any freq ... (twinhan
software)
=> Twinhan in Linux: seems to lock OK to correct freqs/ts (6900,
QAM64), but no PIDs can be extracted on any freq ... (dvbscan)
=> However: decoder box from cable provider: working OK ! (apparently
no signal problem).
So I am starting to be believe that my card is broken somehow.
Card is not broken, if it can lock to a frequency. Something else is
wrong, somewhere in what you are doing.
Glad to be able to report that my card was in fact broken!
I decided to order a 2nd card, because it seemed to be the only
reasonable explanation: card didn't even work on Windoze when using the
supplied driver-CD. However the decoder box from the cable provider did
work fine.
Today my new card came in: works immediately !
Sorry for having you waste your time with this stupid problem; it's just
that it is hard to debug things without any reference or comparison.
Z.
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
