I cannot seem to get the tuner to work on my Twinhan DVB-C Cab-CI.
However, I do notice that scanning goes much faster for frequencies +
QAM-rates that I do know to be correct, and slower if a purposely
mistune the frequency, or enter the wrong QAM-value (eg. 256 istead of
64). So something seems to work, but tuning status always returns 0x00 ...
Output of "dvbscan -vvv <table>"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 314750000 6900000 0 3
tune to: 314750000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
WARNING: >>> tuning failed!!!
tune to: 314750000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64 (tuning failed)
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
tuning status == 0x00
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
I found the discussion in September 2005 about the tuning problems, but
AFAICS the patches are in my drivers (should be, because I downloaded
and installed using mercury last week).
How can obtain more information what is the problem?
Thank you and best regards,
Z.
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
