Thanks Craig, this sounds promising. Can you explain what you mean by
"just used the correct dev/input driver for my card"? I tried setting
the LIRCD_OPTS variable to "-d /dev/lirc/0" (in file /etc/conf.d/lircd)
but this still didn't work.
btw, I now believe that the module responsible for detecting the
additional signals is bttv (thanks to Peter Fern for pointing me in the
right direction).
Alex
Now it seams that there are 2 separate modules that are responding to
key presses on the remote, lircd and one other. If I stop lircd, the
system still responds to the remote
I have seen this with my Dvico Dual Digital Card / remote as well.
Using 2.6.16, the four purple buttons work, but nothing else on it does.
I thought lirc was partialy working, but it turns out even if lirc is not
running the four buttons still work.
I eventually got lirc fully working. Did not change anything else, just
used the correct "dev/input" drivers for my card.
Craig
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
