Michael Müllner wrote:
Try something like this... (adds a -S argument that enables committed
diseqc switch commands)
Thx for the patch, but me cant get it working :(
Me tryed it this way:
./scan -a 0 -p -o vdr -S -s 0
/usr/local/src/hg-dvb-apps/util/scan/dvb-s/Astra-28.2E >
/tmp/channels.conf.Astra28
scanning /usr/local/src/hg-dvb-apps/util/scan/dvb-s/Astra-28.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 10773000 H 22000000 5
tune to: 10773:h:S0.0W:22000:
WARNING: >>> tuning failed!!!
tune to: 10773:h:S0.0W:22000: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
This Astra 28.2° is on my uncommitted switch input 2 (Spaun SUR 420F)
and on input 1 on the 4/1 diseqc behind the uncommitted
Regards Mike
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Ohhh -- so CASCADED switches, eh? Now you say! :-)
That'd be a bit more work, since both uncommitted and committed commands
would have to be sent, and sent in the right order, with a delay between
them. The patch I sent just lets you control either a committed switch
OR an uncommitted switch, not both. Changing it so that the -S arg takes
an integer argument would let you send both commands, and then there'd
need to be a way to specify the order of the switches. Pretty simple,
but I'm out of time to play around with patches ATM.
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
