On Tuesday 02 May 2006 09:39, Leif Jakob wrote:
> On Mon, May 01, 2006 at 08:52:08PM +0200 Thorsten Pferdekämper wrote:
> > Date: Mon, May 01, 2006 at 08:52:08PM +0200
> > From: Thorsten Pferdekämper <thorsten-mailbox@xxxxxxxxxxxxxxxxxxxxxxxxx>
> > To: To LinuxDVB Mailing List
> > Subject: Wintv Nov
>
> Hi Thorsten,
>
> > currently, I am struggling with the Nova-S-Plus (which should be the same
> > as Nova-SE2 regarding this problem).
> >
> > I can watch TV with kaffeine, but only channels I do not really want to
> > watch.
>
> [..]
>
> in the current source tuning and initial scanning for Nova-S is broken
> again. There was a time around end of March where Nova-S worked (you
> had to disable using the isl6421) even with Diseq. But I forgot to
> make a backup of that state :(
Erm, the source code seems to think the nova-s-plus/nova-se2 have isl6421
chips.... but it could bee wrong I suppose. Can you confirm please?
Anyway, attached is the first revision of my cx24123
diseqc/isl6421/nova-s-plus fixes - lemme know if it helps any.
diff -r 29879b34902d linux/drivers/media/dvb/frontends/cx24123.c
--- a/linux/drivers/media/dvb/frontends/cx24123.c Thu May 4 16:39:44 2006 +0100
+++ b/linux/drivers/media/dvb/frontends/cx24123.c Thu May 4 18:59:19 2006 +0100
@@ -48,7 +48,6 @@ struct cx24123_state
u32 lastber;
u16 snr;
- u8 lnbreg;
/* Some PLL specifics for tuning */
u32 VCAarg;
@@ -260,29 +259,6 @@ static int cx24123_writereg(struct cx241
return 0;
}
-static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data)
-{
- u8 buf[] = { reg, data };
- /* fixme: put the intersil addr int the config */
- struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
- int err;
-
- if (debug>1)
- printk("cx24123: %s: writeln addr=0x08, reg 0x%02x, value 0x%02x\n",
- __FUNCTION__,reg, data);
-
- if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
- printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
- " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
- return -EREMOTEIO;
- }
-
- /* cache the write, no way to read back */
- state->lnbreg = data;
-
- return 0;
-}
-
static int cx24123_readreg(struct cx24123_state* state, u8 reg)
{
int ret;
@@ -304,11 +280,6 @@ static int cx24123_readreg(struct cx2412
printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret);
return b1[0];
-}
-
-static int cx24123_readlnbreg(struct cx24123_state* state, u8 reg)
-{
- return state->lnbreg;
}
static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
@@ -698,9 +669,8 @@ static int cx24123_initfe(struct dvb_fro
for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
- /* Configure the LNB for 14V */
- if (state->config->use_isl6421)
- cx24123_writelnbreg(state, 0x0, 0x2a);
+ if (state->config->external_sec)
+ cx24123_writereg(state, 0x2a, (cx24123_readreg(state, 0x2a) & 0xfc) | 0x01);
return 0;
}
@@ -710,50 +680,18 @@ static int cx24123_set_voltage(struct dv
struct cx24123_state *state = fe->demodulator_priv;
u8 val;
- switch (state->config->use_isl6421) {
-
- case 1:
-
- val = cx24123_readlnbreg(state, 0x0);
-
- switch (voltage) {
- case SEC_VOLTAGE_13:
- dprintk("%s: isl6421 voltage = 13V\n",__FUNCTION__);
- return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
- case SEC_VOLTAGE_18:
- dprintk("%s: isl6421 voltage = 18V\n",__FUNCTION__);
- return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
- case SEC_VOLTAGE_OFF:
- dprintk("%s: isl5421 voltage off\n",__FUNCTION__);
- return cx24123_writelnbreg(state, 0x0, val & 0x30);
- default:
- return -EINVAL;
- };
-
- case 0:
-
- val = cx24123_readreg(state, 0x29);
-
- switch (voltage) {
- case SEC_VOLTAGE_13:
- dprintk("%s: setting voltage 13V\n", __FUNCTION__);
- if (state->config->enable_lnb_voltage)
- state->config->enable_lnb_voltage(fe, 1);
- return cx24123_writereg(state, 0x29, val | 0x80);
- case SEC_VOLTAGE_18:
- dprintk("%s: setting voltage 18V\n", __FUNCTION__);
- if (state->config->enable_lnb_voltage)
- state->config->enable_lnb_voltage(fe, 1);
- return cx24123_writereg(state, 0x29, val & 0x7f);
- case SEC_VOLTAGE_OFF:
- dprintk("%s: setting voltage off\n", __FUNCTION__);
- if (state->config->enable_lnb_voltage)
- state->config->enable_lnb_voltage(fe, 0);
- return 0;
- default:
- return -EINVAL;
- };
- }
+ val = cx24123_readreg(state, 0x29);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ dprintk("%s: setting voltage 13V\n", __FUNCTION__);
+ return cx24123_writereg(state, 0x29, val | 0x80);
+ case SEC_VOLTAGE_18:
+ dprintk("%s: setting voltage 18V\n", __FUNCTION__);
+ return cx24123_writereg(state, 0x29, val & 0x7f);
+ default:
+ return -EINVAL;
+ };
return 0;
}
@@ -778,23 +716,16 @@ static int cx24123_send_diseqc_msg(struc
dprintk("%s:\n",__FUNCTION__);
- /* check if continuous tone has been stopped */
- if (state->config->use_isl6421)
- val = cx24123_readlnbreg(state, 0x00) & 0x10;
- else
- val = cx24123_readreg(state, 0x29) & 0x10;
-
-
- if (val) {
- printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
- return -ENOTSUPP;
- }
+ /* stop continuous tone if enabled */
+ val = cx24123_readreg(state, 0x29);
+ if (val & 0x10)
+ cx24123_writereg(state, 0x29, val & ~0x10);
/* wait for diseqc queue ready */
cx24123_wait_for_diseqc(state);
/* select tone mode */
- cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xf8);
+ cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb);
for (i = 0; i < cmd->msg_len; i++)
cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
@@ -815,22 +746,16 @@ static int cx24123_diseqc_send_burst(str
dprintk("%s:\n", __FUNCTION__);
- /* check if continuous tone has been stoped */
- if (state->config->use_isl6421)
- val = cx24123_readlnbreg(state, 0x00) & 0x10;
- else
- val = cx24123_readreg(state, 0x29) & 0x10;
-
-
- if (val) {
- printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
- return -ENOTSUPP;
- }
-
+ /* stop continuous tone if enabled */
+ val = cx24123_readreg(state, 0x29);
+ if (val & 0x10)
+ cx24123_writereg(state, 0x29, val & ~0x10);
+
+ /* wait for diseqc queue ready */
cx24123_wait_for_diseqc(state);
/* select tone mode */
- val = cx24123_readreg(state, 0x2a) & 0xf8;
+ val = cx24123_readreg(state, 0x2a) & 0xfb;
cx24123_writereg(state, 0x2a, val | 0x04);
val = cx24123_readreg(state, 0x29);
@@ -984,38 +909,21 @@ static int cx24123_set_tone(struct dvb_f
struct cx24123_state *state = fe->demodulator_priv;
u8 val;
- switch (state->config->use_isl6421) {
- case 1:
-
- val = cx24123_readlnbreg(state, 0x0);
-
- switch (tone) {
- case SEC_TONE_ON:
- dprintk("%s: isl6421 sec tone on\n",__FUNCTION__);
- return cx24123_writelnbreg(state, 0x0, val | 0x10);
- case SEC_TONE_OFF:
- dprintk("%s: isl6421 sec tone off\n",__FUNCTION__);
- return cx24123_writelnbreg(state, 0x0, val & 0x2f);
- default:
- printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
- return -EINVAL;
- }
-
- case 0:
-
- val = cx24123_readreg(state, 0x29);
-
- switch (tone) {
- case SEC_TONE_ON:
- dprintk("%s: setting tone on\n", __FUNCTION__);
- return cx24123_writereg(state, 0x29, val | 0x10);
- case SEC_TONE_OFF:
- dprintk("%s: setting tone off\n",__FUNCTION__);
- return cx24123_writereg(state, 0x29, val & 0xef);
- default:
- printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
- return -EINVAL;
- }
+ /* wait for diseqc queue ready */
+ cx24123_wait_for_diseqc(state);
+
+ val = cx24123_readreg(state, 0x29);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ dprintk("%s: setting tone on\n", __FUNCTION__);
+ return cx24123_writereg(state, 0x29, val | 0x10);
+ case SEC_TONE_OFF:
+ dprintk("%s: setting tone off\n",__FUNCTION__);
+ return cx24123_writereg(state, 0x29, val & 0xef);
+ default:
+ printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
+ return -EINVAL;
}
return 0;
@@ -1051,7 +959,6 @@ struct dvb_frontend* cx24123_attach(cons
memcpy(&state->ops, &cx24123_ops, sizeof(struct dvb_frontend_ops));
state->lastber = 0;
state->snr = 0;
- state->lnbreg = 0;
state->VCAarg = 0;
state->VGAarg = 0;
state->bandselectarg = 0;
diff -r 29879b34902d linux/drivers/media/dvb/frontends/cx24123.h
--- a/linux/drivers/media/dvb/frontends/cx24123.h Thu May 4 16:39:44 2006 +0100
+++ b/linux/drivers/media/dvb/frontends/cx24123.h Thu May 4 18:59:19 2006 +0100
@@ -28,17 +28,11 @@ struct cx24123_config
/* the demodulator's i2c address */
u8 demod_address;
- /*
- cards like Hauppauge Nova-S Plus/Nova-SE2 use an Intersil ISL6421 chip
- for LNB control, while KWorld DVB-S 100 use the LNBDC and LNBTone bits
- from register 0x29 of the CX24123 demodulator
- */
- int use_isl6421;
+ /* Set this to 1 if there is an external SEC chip */
+ int external_sec;
/* Need to set device param for start_dma */
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
-
- void (*enable_lnb_voltage)(struct dvb_frontend* fe, int on);
};
extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
diff -r 29879b34902d linux/drivers/media/video/cx88/Kconfig
--- a/linux/drivers/media/video/cx88/Kconfig Thu May 4 16:39:44 2006 +0100
+++ b/linux/drivers/media/video/cx88/Kconfig Thu May 4 18:59:19 2006 +0100
@@ -61,6 +61,7 @@ config VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_LGDT330X
select DVB_NXT200X
select DVB_CX24123
+ select DVB_ISL6421
---help---
This builds cx88-dvb with all currently supported frontend
demodulators. If you wish to tweak your configuration, and
@@ -139,6 +140,7 @@ config VIDEO_CX88_DVB_CX24123
default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_CX24123
+ select DVB_ISL6421
---help---
This adds DVB-S support for cards based on the
Connexant 2388x chip and the CX24123 demodulator.
diff -r 29879b34902d linux/drivers/media/video/cx88/cx88-dvb.c
--- a/linux/drivers/media/video/cx88/cx88-dvb.c Thu May 4 16:39:44 2006 +0100
+++ b/linux/drivers/media/video/cx88/cx88-dvb.c Thu May 4 18:59:19 2006 +0100
@@ -60,6 +60,7 @@
#ifdef HAVE_CX24123
# include "cx24123.h"
#endif
+#include "isl6421.h"
MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
MODULE_AUTHOR("Chris Pascoe <c.pascoe@xxxxxxxxxxxxxx>");
@@ -480,28 +481,31 @@ static int cx24123_set_ts_param(struct d
return 0;
}
-static void cx24123_enable_lnb_voltage(struct dvb_frontend* fe, int on)
+static int kworld_dvbs_100_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
- if (on)
+ if (voltage == SEC_VOLTAGE_OFF) {
+ cx_write(MO_GP0_IO, 0x000006fB);
+ } else {
cx_write(MO_GP0_IO, 0x000006f9);
- else
- cx_write(MO_GP0_IO, 0x000006fB);
+ }
+
+ if (core->prev_set_voltage)
+ return core->prev_set_voltage(fe, voltage);
+ return 0;
}
static struct cx24123_config hauppauge_novas_config = {
.demod_address = 0x55,
- .use_isl6421 = 1,
+ .external_sec = 1,
.set_ts_params = cx24123_set_ts_param,
};
static struct cx24123_config kworld_dvbs_100_config = {
.demod_address = 0x15,
- .use_isl6421 = 0,
.set_ts_params = cx24123_set_ts_param,
- .enable_lnb_voltage = cx24123_enable_lnb_voltage,
};
#endif
@@ -711,10 +715,17 @@ static int dvb_register(struct cx8802_de
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
dev->dvb.frontend = cx24123_attach(&hauppauge_novas_config,
&dev->core->i2c_adap);
+ if (dev->dvb.frontend) {
+ isl6421_attach(dev->dvb.frontend, &dev->core->i2c_adap, 0x08, 0x00, 0x00);
+ }
break;
case CX88_BOARD_KWORLD_DVBS_100:
dev->dvb.frontend = cx24123_attach(&kworld_dvbs_100_config,
&dev->core->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->core->prev_set_voltage = dev->dvb.frontend->ops->set_voltage;
+ dev->dvb.frontend->ops->set_voltage = kworld_dvbs_100_set_voltage;
+ }
break;
#endif
default:
diff -r 29879b34902d linux/drivers/media/video/cx88/cx88.h
--- a/linux/drivers/media/video/cx88/cx88.h Thu May 4 16:39:44 2006 +0100
+++ b/linux/drivers/media/video/cx88/cx88.h Thu May 4 18:59:19 2006 +0100
@@ -309,6 +309,7 @@ struct cx88_core {
/* config info -- dvb */
struct dvb_pll_desc *pll_desc;
unsigned int pll_addr;
+ int (*prev_set_voltage)(struct dvb_frontend* fe, fe_sec_voltage_t voltage);
/* state info */
struct task_struct *kthread;
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
