Hi Patrick. I've done a new test with Fedora 5 x86_64 kernel 2.6.16-1.2080_FC5. I've replaced the 5'th entry in drivers/media/dvb/dvb-usb/dibusb-mb.c (line 106) with my own ids (USB_VID_ANCHOR, USB_PID_DIBCOM_ANCHOR_2135_COLD) and with so changed dvb-usb modules my VP7041 runs well. Could you please add a new entry in the source? Best regards, Gabriele P.S.: I'm sorry, my english is alpha version... Il giorno sab, 25/02/2006 alle 17.32 +0100, Gabriele Turchi ha scritto: > Il giorno mar, 21/02/2006 alle 16.28 +0100, Patrick Boettcher ha > scritto: > > Hi, > > > > On Sun, 19 Feb 2006, Gabriele Turchi wrote: > > > I have an old VisionPlus USB 1.1 dvb-t VP-7041E, running flawless on a > > > fedora 3 with dvb_dibusb driver (well, the signal is very low..). When > > > connecting the unit, in dmesg I read: > > > > > > drivers/media/dvb/dibusb/dvb-dibusb-core.c: DiBcom USB1.1 DVB-T > > > reference design (MOD3000) successfully initialized and connected. > > > > > > Today I attached the same unit to a fedora 4 AMD64 (x86_64) equipped PC, > > > and nothing happened... I don't see anything in dmesg after the > > > > > > usb 2-5: new full speed USB device using ohci_hcd and address 4 > > > > > > Apparently, searching in 2.6.15 sources, the VID and PID are still in > > > dvb-usb-ids.h, but only there... > > > > Hmm, what are your USB IDs? > > > > Cold: > > VID: USB_VID_ANCHOR 0x0547 > PID: USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 > > > Warm (on fedora 3 - 2.6.11-1.27_FC3 - dvb-dibusb-5.0.0.11.fw): > > VID: USB_VID_DIBCOM 0x10b8 > PID: USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 > > > > best regards, > > Patrick. > > > > Best regards, > Gabriele > > > -- > > Mail: patrick.boettcher@xxxxxxx > > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
