Il giorno mar, 21/02/2006 alle 16.28 +0100, Patrick Boettcher ha scritto: > Hi, > > On Sun, 19 Feb 2006, Gabriele Turchi wrote: > > I have an old VisionPlus USB 1.1 dvb-t VP-7041E, running flawless on a > > fedora 3 with dvb_dibusb driver (well, the signal is very low..). When > > connecting the unit, in dmesg I read: > > > > drivers/media/dvb/dibusb/dvb-dibusb-core.c: DiBcom USB1.1 DVB-T > > reference design (MOD3000) successfully initialized and connected. > > > > Today I attached the same unit to a fedora 4 AMD64 (x86_64) equipped PC, > > and nothing happened... I don't see anything in dmesg after the > > > > usb 2-5: new full speed USB device using ohci_hcd and address 4 > > > > Apparently, searching in 2.6.15 sources, the VID and PID are still in > > dvb-usb-ids.h, but only there... > > Hmm, what are your USB IDs? > Cold: VID: USB_VID_ANCHOR 0x0547 PID: USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 Warm (on fedora 3 - 2.6.11-1.27_FC3 - dvb-dibusb-5.0.0.11.fw): VID: USB_VID_DIBCOM 0x10b8 PID: USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 > best regards, > Patrick. > Best regards, Gabriele > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
