Hi,
On Sun, 19 Feb 2006, Gabriele Turchi wrote:
I have an old VisionPlus USB 1.1 dvb-t VP-7041E, running flawless on a
fedora 3 with dvb_dibusb driver (well, the signal is very low..). When
connecting the unit, in dmesg I read:
drivers/media/dvb/dibusb/dvb-dibusb-core.c: DiBcom USB1.1 DVB-T
reference design (MOD3000) successfully initialized and connected.
Today I attached the same unit to a fedora 4 AMD64 (x86_64) equipped PC,
and nothing happened... I don't see anything in dmesg after the
usb 2-5: new full speed USB device using ohci_hcd and address 4
Apparently, searching in 2.6.15 sources, the VID and PID are still in
dvb-usb-ids.h, but only there...
Hmm, what are your USB IDs?
best regards,
Patrick.
--
Mail: patrick.boettcher@xxxxxxx
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
