Hi Hartmut,
the patch still works with the latest v4l-sources. So you do not need to
patch them manually.
Regards,
Tim
Am Thu, 16 Feb 2006 00:00:37 +0100 schrieb Hartmut Hackmann
<hartmut.hackmann@xxxxxxxxxxx>:
Hi, Tim, Rainer
Tim Small wrote:
I tested Hartmut's patch yesterday - analogue now works, (the picture
was horrible, but this is apparently because a workman has broken the
cable in the roof space - I will test digital after I have fixed the
cable!). With the patch I've not seen any more i2c errors anyway.
Rainer Schubert wrote:
After I had patches the latest mercurial sources, I had the same
errors as before again.
Yesterday I used HG to download the sources for v4l-dvb and patched
them with Hartmut's patch. It seems there has been one reject this
time.
Make and make install worked fine but depmod complains about
differences
in module versions or symbole versions, I can't remember at the moment.
Use a more recent kernel, and apply the rejected diff by hand (i.e.
just look at the contents of the diff, and make the change yourself),
or tell patch to try harder.
The patch was created against an about 1 week old version, it is quite
likely
that it changed meanwhile. I guess the patches in saa7134-cards.c were
rejected.
Please apply the changes manually - at least the one for the pinnacle
300i.
It is a major portion of the trick. Also please keep in mind that the
tda9887
module needs to be loaded manually before tuner. I have a patch for this
pending.
If you have inconsistent module versions, i guess the reason is that the
kernel is older than 2.6.12. In this case, the dvb modules will not be
updated.
If it is desired, i can also generate a patch for this to make it work
for
at least 2.6.11.
Hartmut
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
