Hartmut Hackmann wrote:
>>
> Yes. On the tiger board, this message switches the tuner either
> to the channel decoder or to the analog IF. Since you have 2 tuners,
> it should not be necessary for you.
>
> If i have to check your code in, please send me a complete patch
> including sign-off.
>
> Best regards
> Hartmut
>
>
Hi,
attached is my patch.
Signed-off-by: Nico Sabbi <nsabbi@xxxxxxxxxx>
Yet, today I experienced something strange:
I loaded the drivers and kept it capturing for 30 minutes without problems;
at the same time I loaded the drivers for my Airstar2 and let it
capture, too.
After I while I wanted to invert the adapter order, so I unloaded both
drivers and
reloaded them in the inverse order, but then (and still now) I can't
upload the firmware
anymore!
tda1004x: setting up plls for 48MHz sampling clock
eth0: freeing mc frame.
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: booting from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: firmware upload failed
sigh, now the card is unusable :(
what's going on? Can't I force the upload of the firmware from file?
Thanks,
Nico
-------------- next part --------------
A non-text attachment was scrubbed...
Name: trio.diff
Type: text/x-patch
Size: 2340 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060127/949c164e/trio.bin
