On Thu, Jan 19, 2006 at 11:16:33AM +0100, Pavel Paprok wrote:
> ----- Original Message -----
> From: "Patrick Boettcher" <patrick.boettcher@xxxxxxx>
> >Hi Pavel,
> >
> >On Thu, 19 Jan 2006, Pavel Paprok wrote:
> >>I just try my first sat card, it is a SkyStar2, on card is printed
> >>exactly:
> >>
> >>MODEL: SKYSTAR 2
> >>P/N 92105-20003
> >>REV: 2.6C
> >>
> >>unfortunatelly in lastest 2.6 kernel (exactly 2.6.15 vanilla without any
> >>extra patches)
> >>card seems to not work, b2c2 driver reporting in log:
> >>
> >>Jan 18 19:06:42 dvb kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III
> >>digital TV receiver chip loaded successfully
> >>Jan 18 19:06:42 dvb kernel: flexcop-pci: will use the HW PID filter.
> >>Jan 18 19:06:42 dvb kernel: flexcop-pci: card revision 1
> >>Jan 18 19:06:42 dvb kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17
> >>(level, low) -> IRQ 185
> >>Jan 18 19:06:42 dvb kernel: b2c2-flexcop: unkown FlexCop Revision: f.
^typo
> >>Please report the linux-dvb@xxxxxxxxxxxx
> >
> >On which platform you are using the flexcop-driver? PPC or (normal) PC?
> >Most likely your card is broken. To be sure that it is not a driver
> >problem, you should try it in windows.
>
> PC, Pentium4, 3GHz, Intel desktop board D865GBF,
> this card was a working in Win but it was in some months ago
> and in other pc... maybe I should try it in Win now again :-(
Reading chip revision register doesn't work -> hardware problem.
(well, could also be a PCI BIOS/chipset-driver problem)
Can you try to put the card in a different slot?
If you try Windows, it would be interesting to know if the card
works with Win on the same PC with the card in the same slot.
Then it would also be interesting to compare lcpci output
(don't know how to do it in windows, though).
Johannes
