----- Original Message ----- From: "Patrick Boettcher" <patrick.boettcher@xxxxxxx> To: "Pavel Paprok" <ppaprok@xxxxxxxxx> Cc: <linux-dvb@xxxxxxxxxxx> Sent: Thursday, January 19, 2006 9:13 AM Subject: Re: [linux-dvb] SkyStar2 reporting unknown FlexCop revision > Hi Pavel, > > On Thu, 19 Jan 2006, Pavel Paprok wrote: >> I just try my first sat card, it is a SkyStar2, on card is printed >> exactly: >> >> MODEL: SKYSTAR 2 >> P/N 92105-20003 >> REV: 2.6C >> >> unfortunatelly in lastest 2.6 kernel (exactly 2.6.15 vanilla without any >> extra patches) >> card seems to not work, b2c2 driver reporting in log: >> >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III >> digital TV receiver chip loaded successfully >> Jan 18 19:06:42 dvb kernel: flexcop-pci: will use the HW PID filter. >> Jan 18 19:06:42 dvb kernel: flexcop-pci: card revision 1 >> Jan 18 19:06:42 dvb kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 >> (level, low) -> IRQ 185 >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: unkown FlexCop Revision: f. >> Please report the linux-dvb@xxxxxxxxxxxx > > On which platform you are using the flexcop-driver? PPC or (normal) PC? > Most likely your card is broken. To be sure that it is not a driver > problem, you should try it in windows. PC, Pentium4, 3GHz, Intel desktop board D865GBF, this card was a working in Win but it was in some months ago and in other pc... maybe I should try it in Win now again :-( > >> Jan 18 19:06:42 dvb kernel: DVB: registering new adapter (FlexCop Digital >> TV device). >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: reading of MAC address failed. >> Jan 18 19:06:42 dvb kernel: >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed >> Jan 18 19:06:42 dvb last message repeated 2 times >> Jan 18 19:06:42 dvb kernel: mt352_read_register: readreg error (reg=127, >> ret==-121) >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed >> Jan 18 19:06:42 dvb kernel: i2c_readbytes: i2c read error (addr 0a, err >> == -121) >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed >> Jan 18 19:06:42 dvb kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 >> select 0x02 error (ret == -121) >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed >> Jan 18 19:06:42 dvb kernel: stv0297_readreg: readreg error (reg == 0x80, >> ret == -22) >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed >> Jan 18 19:06:42 dvb kernel: mt312_read: ret == -121 >> Jan 18 19:06:42 dvb kernel: b2c2-flexcop: no frontend driver found for >> this B2C2/FlexCop adapter > > That there is not frontend found (and thus a lot of i2c-errors) also > indicates that the card is broken. > > I'm sorry, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ >
