Hi,
I just try my first sat card, it is a SkyStar2, on card is printed exactly:
MODEL: SKYSTAR 2
P/N 92105-20003
REV: 2.6C
unfortunatelly in lastest 2.6 kernel (exactly 2.6.15 vanilla without any extra patches)
card seems to not work, b2c2 driver reporting in log:
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Jan 18 19:06:42 dvb kernel: flexcop-pci: will use the HW PID filter.
Jan 18 19:06:42 dvb kernel: flexcop-pci: card revision 1
Jan 18 19:06:42 dvb kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 185
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: unkown FlexCop Revision: f. Please report the linux-dvb@xxxxxxxxxxxx
Jan 18 19:06:42 dvb kernel: DVB: registering new adapter (FlexCop Digital TV device).
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: reading of MAC address failed.
Jan 18 19:06:42 dvb kernel:
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb last message repeated 2 times
Jan 18 19:06:42 dvb kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: i2c_readbytes: i2c read error (addr 0a, err == -121)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -22)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: mt312_read: ret == -121
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jan 18 19:06:42 dvb kernel: ACPI: PCI interrupt for device 0000:01:05.0 disabled
are there some tips what can I do with this problem??
system is FedoraCore3, note that also with original fedora
rpm kernels for FC3 (2.6.9 and update 2.6.12 both
with "skystar2" module yet) card not working.
and also with latest vanilla kernel with v4l-dvb
modules from cvs snapshot v4l-dvb-2006011 no luck :-(
pavel
next info about card from lspci:
01:05.0 Class 0080: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 01)
Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 185
Region 0: Memory at fd900000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at bc00 [size=32]
or numerically
01:05.0 Class 0080: 13d0:2103 (rev 01)
Subsystem: 13d0:2103
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 185
Region 0: Memory at fd900000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at bc00 [size=32]
and about loaded modules:
b2c2_flexcop_pci 12952 0
b2c2_flexcop 33164 1 b2c2_flexcop_pci
mt352 10244 1 b2c2_flexcop
bcm3510 13956 1 b2c2_flexcop
stv0299 13960 1 b2c2_flexcop
dvb_core 80936 2 b2c2_flexcop,stv0299
dvb_pll 14852 1 b2c2_flexcop
nxt2002 12420 1 b2c2_flexcop
stv0297 11520 1 b2c2_flexcop
lgdt330x 11676 1 b2c2_flexcop
mt312 11396 1 b2c2_flexcop
i2c_core 23936 9 i2c_i801,b2c2_flexcop,mt352,bcm3510,stv0299,nxt2002,stv0297,lgdt330x,mt312
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060119/2cf391c0/attachment.htm
