Hi Pavel, On Thu, 19 Jan 2006, Pavel Paprok wrote: > I just try my first sat card, it is a SkyStar2, on card is printed exactly: > > MODEL: SKYSTAR 2 > P/N 92105-20003 > REV: 2.6C > > unfortunatelly in lastest 2.6 kernel (exactly 2.6.15 vanilla without any extra patches) > card seems to not work, b2c2 driver reporting in log: > > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully > Jan 18 19:06:42 dvb kernel: flexcop-pci: will use the HW PID filter. > Jan 18 19:06:42 dvb kernel: flexcop-pci: card revision 1 > Jan 18 19:06:42 dvb kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 185 > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: unkown FlexCop Revision: f. Please report the linux-dvb@xxxxxxxxxxxx On which platform you are using the flexcop-driver? PPC or (normal) PC? Most likely your card is broken. To be sure that it is not a driver problem, you should try it in windows. > Jan 18 19:06:42 dvb kernel: DVB: registering new adapter (FlexCop Digital TV device). > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: reading of MAC address failed. > Jan 18 19:06:42 dvb kernel: > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed > Jan 18 19:06:42 dvb last message repeated 2 times > Jan 18 19:06:42 dvb kernel: mt352_read_register: readreg error (reg=127, ret==-121) > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed > Jan 18 19:06:42 dvb kernel: i2c_readbytes: i2c read error (addr 0a, err == -121) > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed > Jan 18 19:06:42 dvb kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121) > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed > Jan 18 19:06:42 dvb kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -22) > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed > Jan 18 19:06:42 dvb kernel: mt312_read: ret == -121 > Jan 18 19:06:42 dvb kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter That there is not frontend found (and thus a lot of i2c-errors) also indicates that the card is broken. I'm sorry, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
