Artem wrote: >On Wednesday 28 December 2005 19:07, you wrote: > >With dst_algo I din't cheking becouse they load modue dst automaticly. > > This shouldn't be an issue, i will explain .. ># wget >"http://83.110.18.182:8000/cgi-bin/hgwebdir.cgi/v4l-algo-test?cmd=archive;node=675755d11eb289dc063d4fc3fcc0e7503bbd5928;type=bz2"; ># tar jxfv >v4l-algo-test\?cmd\=archive\;node\=675755d11eb289dc063d4fc3fcc0e7503bbd5928\;type\=bz2 ># cd cgi-bin-hgwebdir-cgi-v4l-algo-test-675755d11eb2/ >make >make install > > > -- snip -- >0xd3001000 >: DVB: registering new adapter (bttv0). >: dst_get_device_id: Recognise [DST-03T] >: >: DST type flags : 0x2 ts204 0x4 symdiv 0x10 firmware version = 2 >: dst_get_mac: MAC Address=[00:08:ca:16:5e:00] >: DVB: registering frontend 0 (DST DVB-S)... > >Now It's looks good. > >./scan -l C-BAND Yamal201 >scanning Yamal201 >using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >initial transponder 3645000 H 28000000 5 >initial transponder 3645000 V 28000000 5 > > >>>>tune to: 3645:h:0:28000 >>>> >>>> >0x0000 0x000b: pmt_pid 0x0064 Gascom -- Kultura dubl-1 (running) >0x0000 0x000c: pmt_pid 0x00c8 Gascom -- Kultura dubl-2 (running) >0x0000 0x000d: pmt_pid 0x012c Gascom -- NTV (running) >0x0000 0x000e: pmt_pid 0x0190 Gascom -- TNT (running) >0x0000 0x000f: pmt_pid 0x01f4 Gascom -- DTV +7 (running) >0x0000 0x0010: pmt_pid 0x0258 Gascom -- TV3 (running) >0x0000 0x0011: pmt_pid 0x02bc Gascom -- Sport (running, scrambled) > >I'm typing to config xawtv but they say fontend not locked. > > > Thanks, for testing the hw_algo stuff. I will take a look as to why the hw_algo is no functioning as expected. >kernel: dvb_frontend_thread: using FE_ALGO_HW >last message repeated 46 times > > > The dst module needs to have dst_algo as a module parameter to change the tuning algorithm, hw/sw. If your module is getting loaded automatically, you can make the necessary changes to modprobe.conf, to change the module parameter. This should solve your problem temporarily, since hw_algo is more effecient for the dst, rather than s/w. Manu
